chevron_left chevron_right
2CP 32 / 200C - Three-phase twin impeller centrifugal pump
Flow rate up to 250 l / min (15 m³ / h). Head up to 66.5 m. 3 Kw (4 HP) motor.
100% secure payments
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The PEDROLLO pumps of the 2CP line are recommended for pumping clean water and liquids that are chemically non-aggressive to the materials making up the pump.
The PEDROLLO 2CPm 32 / 200C has a flow rate that varies from 40 to 250 liters per minute with a prevalence from 36 to 66.5 meters.
The high yields and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil, industrial sector; in particular for the distribution of water in conjunction with autoclave tanks, for increasing the pressure in the network, for fire-fighting units.
The installation must be carried out in closed places or in any case protected from bad weather.
Data sheet
2CP 32/200C
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 4
- Absorption at 230V (A)
- 12.8
- Absorption at 400V (A)
- 4.0
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/4
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 2
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 40
- Max flow (l./min.)
- 250
- Min head (m.)
- 36
- Max head (m.)
- 70
- Employments
- fire prevention systems, pressurization systems, water supply
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 30.4
- Width (cm)
- 26.6
- Depth (cm)
- 46.4
- Weight kg)
- 38
- Guarantee
- Two years
Reviews (1) - Review moderation
100% (1)
0% (0)
0% (0)
0% (0)
0% (0)
Elettropompa
Report an abuse
Ottimo prodotto.arrivato dopo 4gg
By antonio l. the 06/22/2022
Compare with Similar Products
 2CP 32 / 200C - Three-phase twin impeller centrifugal pumpThis product (5/5) out of 1 total ratings Flow rate up to 250 l / min (15 m³ / h). Head up to 66.5 m. 3 Kw (4 HP) motor. |  2CP 32 / 200B - Three-phase twin impeller centrifugal pump (1/5) out of 1 total ratings Flow rate up to 250 l / min (15 m³ / h). Head up to 81 m. 4 Kw (5.5 HP) engine. |  2CP 32 / 210A - Three-phase twin impeller centrifugal pumpFlow rate up to 250 l / min (15 m³ / h). Head up to 111 m. 7.5 Kw (10 HP) motor. |  2CP 32 / 210B - Three-phase twin impeller centrifugal electric pumpFlow rate up to 250 l / min (15 m³ / h). Head up to 94 m. 5.5 Kw (7.5 HP) motor. | |
|---|---|---|---|---|
Brand | Brand Pedrollo | Brand Pedrollo | Brand Pedrollo | Brand Pedrollo |
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 4 | Motor power (HP) 5.5 | Motor power (HP) 10 | Motor power (HP) 7.5 |
Absorption at 230V (A) | Absorption at 230V (A) 12.8 | Absorption at 230V (A) 10.5 | Absorption at 230V (A) 27.7 | Absorption at 230V (A) 12.5 |
Absorption at 400V (A) | Absorption at 400V (A) 4.0 | Absorption at 400V (A) -- | Absorption at 400V (A) 16.0 | Absorption at 400V (A) 21.7 |
Suction mouth | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 2" | Suction mouth 2" |
Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Brass | Impeller Brass | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 2 | Number of impellers 2 | Number of impellers 2 | Number of impellers 2 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 40 | Flow rate min. (l./min.) 40 | Flow rate min. (l./min.) 40 | Flow rate min. (l./min.) 40 |
Max flow (l./min.) | Max flow (l./min.) 250 | Max flow (l./min.) 250 | Max flow (l./min.) 250 | Max flow (l./min.) 250 |
Min head (m.) | Min head (m.) 36 | Min head (m.) 49 | Min head (m.) 74 | Min head (m.) 56 |
Max head (m.) | Max head (m.) 70 | Max head (m.) 85 | Max head (m.) 112 | Max head (m.) 94 |
Employments | Employments fire prevention systems, pressurization systems, water supply | Employments water supply, pressurization systems, fire prevention systems | Employments fire prevention systems, pressurization systems, water supply | Employments fire prevention systems, pressurization systems, water supply |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
Height (cm) | Height (cm) 30.4 | Height (cm) 30.4 | Height (cm) 33.4 | Height (cm) 33.4 |
Width (cm) | Width (cm) 26.6 | Width (cm) 26.6 | Width (cm) 29.2 | Width (cm) 29.2 |
Depth (cm) | Depth (cm) 46.4 | Depth (cm) 46.4 | Depth (cm) 49.6 | Depth (cm) 54.2 |
Weight kg) | Weight kg) 38 | Weight kg) 43 | Weight kg) 61 | Weight kg) 54 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |
2CP models and performance
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CP 32/200
Bearings
| Pump side motor bearing | 6206 ZZ- C3 |
| Opposite side motor bearing | 6206 ZZ- C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-20 |
| LP diameter | 20 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Materials
| 1.1 - Aspiring Body | Cast iron GJL 200 EN 1561 |
| 1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46122 |
