PQm 81-PRO - Electric pump with single-phase peripheral impeller
Flow rate up to 15 l / min (0.9 m³ / h). Head up to 80 m. 0.45 Kw (0.60 HP) motor.
100% secure payments
It is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials from which the pump is made.
Due to its reliability, ease of use and cost-effectiveness, it is suitable for domestic use and in particular for the distribution of water in conjunction with small autoclave tanks, for irrigation of vegetable gardens and gardens.
The installation must be carried out in closed places or in any case protected from bad weather.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.60
- Absorption at 230V (A)
- 2.7
- Capacitor
- 12.5 µF450 VL
- Suction mouth
- 1/2 "
- Delivery port
- 1/2 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 1
- Max flow (l./min.)
- 15
- Min head (m.)
- 5
- Max head (m.)
- 80
- Employments
- water supply
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 15.3
- Width (cm)
- 22.4
- Depth (cm)
- 12
- Weight kg)
- 6.9
- Guarantee
- Two years
Reviews (4) - Review moderation
Salve h ok trovato una ditta seria nella qualità del prodotto e la velocità di consegna ringrazio tanto per la politica del vostro lavoro .
Il cliente non ha lasciato alcun commento.
Il cliente non ha lasciato alcun commento.
Buon prezzo e consegna rapida. Lo consiglio, saluti a Prato Erboso
Compare with Similar Products
 PQm 81-PRO - Electric pump with single-phase peripheral impellerThis product (4,3/5) out of 4 total ratings Flow rate up to 15 l / min (0.9 m³ / h). Head up to 80 m. 0.45 Kw (0.60 HP) motor. |  PQm 81-Bs - Electric pump with single-phase peripheral impeller (4,3/5) out of 3 total ratings Flow rate up to 15 l / min (0.9 m³ / h). Head up to 80 m. 0.45 Kw (0.60 HP) motor. | |
|---|---|---|
Brand | Brand Pedrollo | Brand Pedrollo |
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 0.60 | Motor power (HP) 0.60 |
Absorption at 230V (A) | Absorption at 230V (A) 2.7 | Absorption at 230V (A) 3.7 |
Capacitor | Capacitor 12.5 µF450 VL | Capacitor 12.5 µF450 VL |
Suction mouth | Suction mouth 1/2 " | Suction mouth 1/2 " |
Delivery port | Delivery port 1/2 " | Delivery port 1/2 " |
Body Pump | Body Pump Cast iron | Body Pump brass, equipped with ISO 228/1 threaded union |
Impeller | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 1 | Flow rate min. (l./min.) 1 |
Max flow (l./min.) | Max flow (l./min.) 15 | Max flow (l./min.) 15 |
Min head (m.) | Min head (m.) 5 | Min head (m.) 5 |
Max head (m.) | Max head (m.) 80 | Max head (m.) 80 |
Employments | Employments water supply | Employments water supply |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 15.3 | Height (cm) 15.5 |
Width (cm) | Width (cm) 22.4 | Width (cm) 22.4 |
Depth (cm) | Depth (cm) 12 | Depth (cm) 11.9 |
Weight kg) | Weight kg) 6.9 | Weight kg) 6.9 |
Guarantee | Guarantee Two years | Guarantee -- |
PQm models and performance
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PQ 81-PRO
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | ST1-12 |
| LP diameter | 12 |
| Fixed ring LP | Silicon carbide |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Brass CW617N EN 12165 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
