FUTURE JETm 2C-ST - 1 HP single-phase self-priming electric pump
Flow rate up to 120 l/min (7.2 m³/h). Head up to 50 m. 0.75 Kw (1 HP) motor.
The FUTURE JETm 2C-ST self-priming electric pump is recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. It is designed to suck water even in the presence of air mixed with the pumped liquid.
It has a flow rate that varies from 5 to 120 litres per minute with a head of 6 to 50 metres.
With an internationally registered patent, the FUTURE JET series electric pumps are able to obtain the same pressure as a classic JET but double its flow rate, thus obtaining a reduction in energy consumption of up to 50%.
Due to its reliability and ease of use, it is recommended for domestic use, especially for water distribution in conjunction with small or medium pressure tanks, for irrigation of vegetable gardens and gardens.
Installation must be carried out in well-ventilated closed places or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 2.8
- Capacitor
- 20 µF450 VL
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 60
- Min head (m.)
- 10
- Max head (m.)
- 35
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 18.2
- Width (cm)
- 18.2
- Depth (cm)
- 36.1
- Weight kg)
- 7.1
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203ZZ |
| Opposite side engine bearing | 6203ZZ |
Shaft seal
| Seal type | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| LP fixed ring | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 3.1 - Ejector Group | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor carrier | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
 FUTURE JETm 2C-ST - 1 HP single-phase self-priming electric pumpThis product Flow rate up to 120 l/min (7.2 m³/h). Head up to 50 m. 0.75 Kw (1 HP) motor. |  FUTURE JETm 1C-ST - 0.50 HP single-phase self-priming electric pumpFlow rate up to 90 l/min (5.4 m³/h). Head up to 33.5 m. 0.37 Kw (0.50 HP) motor. |  FUTURE JETm 2A-ST - 1.5 HP single-phase self-priming electric pumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 58 m. 1.1 Kw (1.5 HP) motor. |  FUTURE JETm 2B-ST - 1.25 HP single-phase self-priming electric pumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 39.5 m. 0.90 Kw (1.25 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.50 | Motor power (HP) 1.5 | Motor power (HP) 1.25 |
| Absorption at 230V (A) | Absorption at 230V (A) 2.8 | Absorption at 230V (A) 2.8 | Absorption at 230V (A) 2.8 | Absorption at 230V (A) 2.8 |
| Capacitor | Capacitor 20 µF450 VL | Capacitor 10 µF450 VL | Capacitor 25 µF450 VL | Capacitor 12.5 µF450 VL |
| Suction mouth | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 60 | Max flow (l./min.) 60 | Max flow (l./min.) 60 | Max flow (l./min.) 60 |
| Min head (m.) | Min head (m.) 10 | Min head (m.) 10 | Min head (m.) 10 | Min head (m.) 10 |
| Max head (m.) | Max head (m.) 35 | Max head (m.) 35 | Max head (m.) 35 | Max head (m.) 35 |
| Employments | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 18.2 | Height (cm) 18.2 | Height (cm) 18.2 | Height (cm) 18.2 |
| Width (cm) | Width (cm) 18.2 | Width (cm) 18.2 | Width (cm) 18.2 | Width (cm) 18.2 |
| Depth (cm) | Depth (cm) 36.1 | Depth (cm) 36.1 | Depth (cm) 36.1 | Depth (cm) 36.1 |
| Weight kg) | Weight kg) 7.1 | Weight kg) 7.1 | Weight kg) 7.1 | Weight kg) 7.1 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
