SKR 1.5 - Three-phase self-priming electric pump
Flow rate up to 300 l/min (18 m³/h). Head up to 25.5 m. 1.5 kW (2 HP) motor.
The SKR 1.5 self-priming electric pump is recommended for pumping clean water and chemically non-aggressive liquids for the materials making up the pump.
It has a flow rate that varies from 50 to 300 liters per minute with a head from 15 to 25.5 metres.
It is designed to suck water even in the presence of air mixed with the pumped liquid. Due to their reliability and ease of use, they are recommended for domestic and civil use, especially for distributing water coupled with autoclave tanks, for irrigating vegetable gardens and gardens.
The installation must be carried out in closed places or in any case protected from bad weather.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 2
- Absorption at 230V (A)
- 2.8
- Capacitor
- 45 µF450 VL
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 60
- Min head (m.)
- 10
- Max head (m.)
- 35
- Employments
- transfer of tanks, water supply, pressurization systems
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 18.2
- Width (cm)
- 18.2
- Depth (cm)
- 36.1
- Weight kg)
- 7.1
- Guarantee
- Two years
|
|
|
|
|
Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side engine bearing | 6204 ZZ |
Tree holding
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
6.0 - Motor holder | EN-AB 46100 aluminium |
7.0 - Lantern | EN-AB 46100 aluminium |