CPm 200-ST6 - centrifugal electric Pump stainless steel single phase
Stainless steel AISI 316L. Flow up to 270 l/min (16.2 m3/h). Head up to 45 m. Motor 2.2 Kw (3 HP).
There are no reviews yet
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
It is recommended for pumping clean water and liquids chemically non aggressive to the materials making up the pump.
For the constructive features, this centrifugal pump is recommended for use in the domestic sector, agricultural and industrial.
All components in contact with the pumped liquid are in stainless steel AISI 316L to guarantee total hygiene and maximum resistance to corrosion.
The installation is to be carried out indoors or otherwise protected from the weather.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 3
- Absorption at 230V (A)
- 12.8
- Capacitor
- 50 µF450 VL
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 316 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 40
- Max flow (l./min.)
- 270
- Min head (m.)
- 18
- Max head (m.)
- 45
- Employments
- water supply, irrigation, cooling systems, air conditioning systems, washing systems, water treatment plants
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 230 V
- Height (cm)
- 23.75
- Width (cm)
- 38.8
- Depth (cm)
- 24.5
- Weight kg)
- 17.1
- Guarantee
- Two years
CPm-ST6 models and performance
|
|
|
|
|
Construction data of the CP 170-170M-180-190-200-ST6
Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side motor bearing | 6204 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
Fixed ring LP | Graphite |
Rotating ring LP | Ceramic |
LP elastomer | NBR |
Mat
1.0 - Pump Body | EN 1.4404 stainless steel (AISI 316L) |
2.1 - Seal holder cover | EN 1.4404 stainless steel (AISI 316L) |
3.0 - Impeller | EN 1.4404 stainless steel (AISI 316L) |
4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
5.2 - Shim Ring | PTFE |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |