FUTURE JETm 1A - Single-phase self-priming electric pump
Flow rate up to 100 l/min (6 m³/h). Head up to 48 m. 0.55 Kw (0.75 HP) motor.
The Pedrollo FUTURE JETm 1A self-priming electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials constituting the pump. It is designed to suck water even in the presence of air mixed with the pumped liquid.
It has a flow rate that varies from 5 to 100 liters per minute with a prevalence of 9 to 48 metres.
With a patent registered at an international level, the electric pumps of the FUTURE JET series are able to obtain the same pressure as a classic JET while doubling the flow rate, obtaining a reduction in energy consumption of up to 50%.
Due to its reliability and ease of use, it is recommended for domestic use, especially for water distribution in combination with small or medium-sized autoclave tanks, for watering vegetable patches and gardens.
Installation must be carried out in closed, well-ventilated places or in any case protected from bad weather.
- Motor connection
- SINGLE PHASE
- Motor power (Kw)
- 0.75
- Absorption at 230V (A)
- 4
- Capacitor
- 12 µF450 VL
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 100
- Min head (m.)
- 9
- Max head (m.)
- 48
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 17.1
- Width (cm)
- 15.8
- Depth (cm)
- 35.7
- Weight kg)
- 9.7
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6201ZZ |
| Opposite side engine bearing | 6201ZZ |
Shaft seal
| Seal type | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | GJL 200 EN 1561 cast iron |
| 2.1 - Seal holder cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 3.1 - Ejector group | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor carrier | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
 FUTURE JETm 1A - Single-phase self-priming electric pumpThis product Flow rate up to 100 l/min (6 m³/h). Head up to 48 m. 0.55 Kw (0.75 HP) motor. |  FUTURE JETm 1B - Single-phase self-priming electric pumpFlow rate up to 95 l/min (5.7 m³/h). Head up to 39.5 m. 0.48 kW (0.65 HP) motor. |  FUTURE JETm 1C - Single-phase self-priming electric pumpFlow rate up to 90 l/min (3.5 m³/h). Head up to 33.5 m. 0.37 kW (0.50 HP) motor. |  FUTURE JETm 2A - Single-phase self-priming electric pumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 58 m. 0.75 kW (1 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (Kw) | Motor power (Kw) 0.75 | Motor power (Kw) 0.65 | Motor power (Kw) -- | Motor power (Kw) -- |
| Motor power (HP) | Motor power (HP) -- | Motor power (HP) -- | Motor power (HP) 0.50 | Motor power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 4 | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 2.8 | Absorption at 230V (A) 2.8 |
| Capacitor | Capacitor 12 µF450 VL | Capacitor 12 µF450 VL | Capacitor 10 µF450 VL | Capacitor 25 µF450 VL |
| Suction mouth | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 100 | Max flow (l./min.) 95 | Max flow (l./min.) 60 | Max flow (l./min.) 60 |
| Min head (m.) | Min head (m.) 9 | Min head (m.) 5.5 | Min head (m.) 10 | Min head (m.) 10 |
| Max head (m.) | Max head (m.) 48 | Max head (m.) 39.5 | Max head (m.) 35 | Max head (m.) 35 |
| Employments | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 17.1 | Height (cm) 17.1 | Height (cm) 18.2 | Height (cm) 18.2 |
| Width (cm) | Width (cm) 15.8 | Width (cm) 15.8 | Width (cm) 18.2 | Width (cm) 18.2 |
| Depth (cm) | Depth (cm) 35.7 | Depth (cm) 35.7 | Depth (cm) 36.1 | Depth (cm) 36.1 |
| Weight kg) | Weight kg) 9.7 | Weight kg) 9.7 | Weight kg) 7.1 | Weight kg) 7.1 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
