4BLOCKm 2/12 (30m) - 1 HP single-phase submersible pump
Flow rate up to 60 l / min (3.6 m³ / h). Head up to 90 m. 0.75 Kw (1 HP) motor. 30 meters of cable.
Monobloc submersible electric pump in stainless steel ready to install.
It is complete with: condenser, built-in thermal overload protector and 20 meter power cable.
The PEDROLLO 4BLOCKm 2/12 has a flow rate that varies from 10 to 60 liters per minute with a prevalence from 35.5 to 90 meters.
The head that the pump can reach depends on the motor the pump is equipped with and the number of impellers it has.
It is recommended for supplying clean water from wells even in the presence of sand (up to 150 g / m³).
Due to its high performance and reliability it is recommended for use in the domestic sector, for the automatic distribution of water in conjunction with autoclaves, for irrigation, etc.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 6
- Capacitor
- 35 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 12
- Pump shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 60
- Min head (m.)
- 35.5
- Max head (m.)
- 90
- Cable length (m)
- 30
- Employments
- irrigation
- Liquid temperature max. (° C)
- 35
- Height (cm)
- 78.6
- Outside diameter (cm)
- 10
- Weight kg)
- 14.3
- Guarantee
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 |
| Opposite side engine bearing | 6203 |
Tree holding
| Type of seal | Single Mechanical Seal in oil chamber |
| Engine side model | ST1-16 |
| LM diameter | 16 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Reinforced technopolymer |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 4BLOCKm 2/12 (30m) - 1 HP single-phase submersible pumpThis product Flow rate up to 60 l / min (3.6 m³ / h). Head up to 90 m. 0.75 Kw (1 HP) motor. 30 meters of cable. |  4BLOCKm 2/9 (30m) - 0.75 HP single-phase submersible pumpFlow rate up to 60 l / min (3.6 m³ / h). Head up to 67.5 m. 0.55 Kw (0.75 HP) motor. 30 meters of cable. |  4BLOCKm 2/18 (30m) - 1.5 HP single-phase submersible pumpFlow rate up to 60 l / min (3.6 m³ / h). Head up to 135 m. 1.1 Kw (1.5 HP) engine. 30 meters of cable. |  4BLOCKm 4/4 (30m) - 0.50 HP single-phase submersible pumpFlow rate up to 100 l / min (6 m³ / h). Head up to 30 m. 0.37 Kw (0.50 HP) motor. 30 meters of cable. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.75 | Motor power (HP) 1.5 | Motor power (HP) 0.50 |
| Absorption at 230V (A) | Absorption at 230V (A) 6 | Absorption at 230V (A) 5 | Absorption at 230V (A) 8 | Absorption at 230V (A) 5 |
| Capacitor | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller Delrin | Impeller Delrin | Impeller Delrin | Impeller Delrin |
| Number of impellers | Number of impellers 12 | Number of impellers 9 | Number of impellers 18 | Number of impellers 4 |
| Pump shaft | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve Yes | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 60 | Max flow (l./min.) 60 | Max flow (l./min.) 60 | Max flow (l./min.) 100 |
| Min head (m.) | Min head (m.) 35.5 | Min head (m.) 26.5 | Min head (m.) 53.5 | Min head (m.) 10 |
| Max head (m.) | Max head (m.) 90 | Max head (m.) 67.5 | Max head (m.) 135 | Max head (m.) 30 |
| Cable length (m) | Cable length (m) 30 | Cable length (m) 30 | Cable length (m) 20 | Cable length (m) 30 |
| Employments | Employments irrigation | Employments irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 |
| Height (cm) | Height (cm) 78.6 | Height (cm) 70.5 | Height (cm) 98.6 | Height (cm) 67.4 |
| Outside diameter (cm) | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10.1 |
| Weight kg) | Weight kg) 14.3 | Weight kg) 12.5 | Weight kg) 10 | Weight kg) 12.1 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Envoi rapide et pompe conforme Je recommande
