chevron_left chevron_right
4HR 14/21 - PS - 5.5 HP three-phase electric submersible pump
Flow rate up to 340 l/min (20.4 m³/h). Head up to 108 metres. 4 Kw (5.5 HP) motor.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Reinforced packaging to reduce transport damage.
Description
Submersible electric pump with pump body in precision cast AISI 304 stainless steel and PEDROLLO motor encapsulated motor in water bath.
The PEDROLLO 4HR 14/21 - PS is recommended for pumping clean water with a sand content not exceeding 100 g/m³.
It has a flow rate that varies from 50 to 340 liters per minute with a head from 26.5 to 108 meters.
Due to its high efficiency and reliability, it is suitable for use in the domestic, civil and industrial fields, for the distribution of water coupled with autoclaves, for the irrigation of vegetable gardens and gardens, for washing systems, for increasing pressure or for fire extinguishing systems.
Data sheet
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 5.5
- Delivery port
- 2"
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 21
- Pump shaft
- AISI 304 stainless steel
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 340
- Min head (m.)
- 26.5
- Max head (m.)
- 108
- Cable length (m)
- 3.6
- Employments
- pressurization systems, irrigation, fire prevention systems, water supply
- Liquid temperature max. (° C)
- +35°C
- Height (cm)
- 225.3
- Width (cm)
- 100
- Weight kg)
- 54
- Guarantee
- 2
4HR 14 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4HR series
Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Stainless steel EN 1.4301 (AISI 304) |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 5.2 - Wear ring | Special elastomer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 4HR 14/21 - PS - 5.5 HP three-phase electric submersible pumpThis product Flow rate up to 340 l/min (20.4 m³/h). Head up to 108 metres. 4 Kw (5.5 HP) motor. |  4HR 14/12 - PS - 3 HP three-phase electric submersible pumpFlow rate up to 340 l/min (20.4 m³/h). Head up to 62 metres. 2.2 kW (3 HP) motor. |  4HR 14/16 - PS - 4 HP three-phase electric submersible pumpFlow rate up to 340 l/min (20.4 m³/h). Head up to 82 metres. 3 Kw (4 HP) motor. |  4HR 14/29 - PS - 7.5 HP three-phase electric submersible pumpFlow rate up to 340 l/min (20.4 m³/h). Head up to 149 metres. 5.5 kW (7.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (HP) | Motor power (HP) 5.5 | Motor power (HP) 3 | Motor power (HP) 4 | Motor power (HP) 7.5 |
| Delivery port | Delivery port 2" | Delivery port 2" | Delivery port 2" | Delivery port 2" |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 21 | Number of impellers 12 | Number of impellers 16 | Number of impellers 29 |
| Pump shaft | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft -- |
| Check valve | Check valve -- | Check valve Yes | Check valve -- | Check valve -- |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 340 | Max flow (l./min.) 340 | Max flow (l./min.) 340 | Max flow (l./min.) 340 |
| Min head (m.) | Min head (m.) 26.5 | Min head (m.) 15 | Min head (m.) 20 | Min head (m.) 36.5 |
| Max head (m.) | Max head (m.) 108 | Max head (m.) 62 | Max head (m.) 82 | Max head (m.) 149 |
| Cable length (m) | Cable length (m) 3.6 | Cable length (m) 2 | Cable length (m) 3.6 | Cable length (m) 3.6 |
| Employments | Employments pressurization systems, irrigation, fire prevention systems, water supply | Employments water supply, pressurization systems, irrigation, fire prevention systems | Employments pressurization systems, irrigation, fire prevention systems, water supply | Employments irrigation, fire prevention systems, water supply, pressurization systems |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C |
| Height (cm) | Height (cm) 225.3 | Height (cm) 137.4 | Height (cm) 179.8 | Height (cm) 292.7 |
| Width (cm) | Width (cm) 100 | Width (cm) -- | Width (cm) -- | Width (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) -- | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 |
| Weight kg) | Weight kg) 54 | Weight kg) 32.1 | Weight kg) 41 | Weight kg) 69.1 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
