chevron_left chevron_right
6HR 64/8 - PD - Three-phase electric submersible pump 25 HP
Flow rate up to 1500 l/min (90 m³/h). Head up to 104 metres. 18.5 kW (25 HP) motor.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Reinforced packaging to reduce transport damage.
Description
Submersible electric pump with pump body in precision cast AISI 304 stainless steel and PEDROLLO motor encapsulated in oil bath.
The 6HR 64/8 - PD pump is recommended for pumping clean water with a sand content not exceeding 100 g/m³.
It has a flow rate that varies from 400 to 1500 liters per minute with a head from 40 to 104 meters.
Due to its high efficiency and reliability, it is suitable for use in the civil, agricultural and industrial fields, for the distribution of water coupled with autoclaves, for irrigation, for increasing pressure, for fire-fighting systems.
Data sheet
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 25
- Delivery port
- 3 "
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Flow rate min. (l./min.)
- 400
- Max flow (l./min.)
- 1500
- Min head (m.)
- 40
- Max head (m.)
- 104
- Employments
- washing systems, transfer of tanks, water treatment plants, fire prevention systems, irrigation, pressurization systems, water supply
- Liquid temperature max. (° C)
- +35°C
- Height (cm)
- 201.7
- Outside diameter (cm)
- 15
- Weight kg)
- 94.2
- Guarantee
- 2
6HR 64 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 6HR series
Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Stainless steel EN 1.4301 (AISI 304) |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 5.2 - Wear ring | Special elastomer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
