chevron_left chevron_right
6SR18/15 - PSR - 17.5 HP three-phase electric submersible pump
Flow rate up to 450 l/min (27 m³/h). Head up to 202 m. 13 Kw (17.5 HP) motor.
Reinforced packaging to reduce transport damage.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
The PEDROLLO 6SR18/15 submersible electric pump is recommended for pumping clean water with a sand content not exceeding 100g/m³.
The PEDROLLO 6SR18/15 has a flow rate that varies from 50 to 450 liters per minute with a head from 80 to 202 metres.
Due to its high efficiency and reliability, it is suitable for use in the civil, industrial and agricultural fields, for the distribution of water coupled with autoclaves, for irrigation, for washing systems, for increasing pressure or for fire-fighting systems.
Data sheet
- Motor connection
- THREE-PHASE
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 15
- Pump shaft
- AISI 304 stainless steel
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 450
- Min head (m.)
- 80
- Max head (m.)
- 203
- Employments
- fire prevention systems, irrigation, pressurization systems, water supply
- Liquid temperature max. (° C)
- 35
- Guarantee
- 2
6SR 18 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 6SR series
Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4021 (AISI 420) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
