CPm 160B - 2 HP single-phase centrifugal electric pump
Flow rate up to 220 l/min (13.2 m³/h). Head up to 37 m. 1.5 Kw (2 HP) motor.
It is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to their reliability and ease of use, they are widely used in the domestic and civil sector, in particular for the distribution of water in conjunction with small and medium-sized pressure tanks, for decanting and for irrigation of vegetable gardens and gardens.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 2
- Absorption at 230V (A)
- 10.3
- Capacitor
- 45 µF450 VL
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 220
- Min head (m.)
- 23
- Max head (m.)
- 37
- Employments
- water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 230 V
- Height (cm)
- 26
- Width (cm)
- 20.7
- Depth (cm)
- 37.3
- Weight kg)
- 21
- Guarantee
- 2
Bearings
Pump side motor bearing | 6304 ZZ |
Opposite side motor bearing | 6204 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
Fixed ring LP | Graphite |
Rotating ring LP | Ceramic |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
CPm 160B - 2 HP single-phase centrifugal electric pumpThis product Flow rate up to 220 l/min (13.2 m³/h). Head up to 37 m. 1.5 Kw (2 HP) motor. | CPm 160C - 1.5 HP Single Phase Centrifugal Electric PumpFlow rate up to 200 l/min (12 m³/h). Head up to 32 m. 1.1 Kw (1.5 HP) motor. | |
---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 2 | Motor power (HP) 1.5 |
Absorption at 230V (A) | Absorption at 230V (A) 10.3 | Absorption at 230V (A) 8.6 |
Capacitor | Capacitor 45 µF450 VL | Capacitor 31.5 µF450 VL |
Suction mouth | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 |
Delivery port | Delivery port 1 " | Delivery port 1 " |
Body Pump | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 55 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
Max flow (l./min.) | Max flow (l./min.) 220 | Max flow (l./min.) 200 |
Min head (m.) | Min head (m.) 23 | Min head (m.) 20 |
Max head (m.) | Max head (m.) 37 | Max head (m.) 32 |
Employments | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, transfer of tanks |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 26 | Height (cm) 26 |
Width (cm) | Width (cm) 20.7 | Width (cm) 20.7 |
Depth (cm) | Depth (cm) 37.3 | Depth (cm) 37.3 |
Weight kg) | Weight kg) 21 | Weight kg) 19.7 |
Guarantee | Guarantee 2 | Guarantee 2 |