HF 4 - 1 HP three-phase centrifugal electric pump
Flow rate up to 800 l/min (48 m³/h). Head up to 9.3 m. 0.75 Kw (1 HP) motor.
The PEDROLLO pumps of the HF high flow rate line are recommended for civil and agricultural environments.
The PEDROLLO HF 4 has a flow rate that varies from 200 to 800 litres per minute with a head from 9.3 to 3 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 4.3
- Absorption at 400V (A)
- 2.5
- Suction mouth
- 2 "1/2
- Delivery port
- 2 "1/2
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 200
- Max flow (l./min.)
- 800
- Min head (m.)
- 4
- Max head (m.)
- 9.8
- Employments
- water supply, irrigation, cooling systems, transfer of tanks
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 24
- Width (cm)
- 31.7
- Depth (cm)
- 19.8
- Weight kg)
- 13.2
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side motor bearing | 6203 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | AR-14 |
LP diameter | 14 |
Fixed ring LP | Ceramic |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
HF 4 - 1 HP three-phase centrifugal electric pumpThis product Flow rate up to 800 l/min (48 m³/h). Head up to 9.3 m. 0.75 Kw (1 HP) motor. | HF 6A - 3 HP three-phase centrifugal electric pumpFlow rate up to 1200 l/min (72 m³/h). Head up to 18.1 m. 2.2 Kw (3 HP) motor. | HF 6B - 2 HP three-phase centrifugal electric pumpFlow rate up to 1100 l/min (66 m³/h). Head up to 14.5 m. 1.5 Kw (2 HP) motor. | HF 6C - 1.5 HP three-phase centrifugal electric pumpFlow rate up to 1000 l/min (60 m³/h). Head up to 11.7 m. 1.1 Kw (1.5 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 3 | Motor power (HP) 2 | Motor power (HP) 1.5 |
Absorption at 230V (A) | Absorption at 230V (A) 4.3 | Absorption at 230V (A) 9.0 | Absorption at 230V (A) 7.8 | Absorption at 230V (A) 6.2 |
Absorption at 400V (A) | Absorption at 400V (A) 2.5 | Absorption at 400V (A) 5.2 | Absorption at 400V (A) 4.5 | Absorption at 400V (A) 3.6 |
Suction mouth | Suction mouth 2 "1/2 | Suction mouth 3 " | Suction mouth 3 " | Suction mouth 3 " |
Delivery port | Delivery port 2 "1/2 | Delivery port 3 " | Delivery port 3 " | Delivery port 3 " |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Brass | Impeller Brass | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 200 |
Max flow (l./min.) | Max flow (l./min.) 800 | Max flow (l./min.) 1200 | Max flow (l./min.) 1100 | Max flow (l./min.) 1000 |
Min head (m.) | Min head (m.) 4 | Min head (m.) 6 | Min head (m.) 5 | Min head (m.) 4 |
Max head (m.) | Max head (m.) 9.8 | Max head (m.) 18.5 | Max head (m.) 14.8 | Max head (m.) 12 |
Employments | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C |
Motor voltage | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 400 V |
Height (cm) | Height (cm) 24 | Height (cm) 31.2 | Height (cm) 31.2 | Height (cm) 31.2 |
Width (cm) | Width (cm) 31.7 | Width (cm) 42.9 | Width (cm) 41.1 | Width (cm) 41.1 |
Depth (cm) | Depth (cm) 19.8 | Depth (cm) 24 | Depth (cm) 24 | Depth (cm) 24 |
Weight kg) | Weight kg) 13.2 | Weight kg) 26.7 | Weight kg) 25.5 | Weight kg) 24.2 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |