chevron_left chevron_right
-42%
HFm 70B - 2 HP Single Phase Centrifugal Electric Pump
Flow rate up to 300 l/min (18 m³/h). Head up to 33 m. 1.5 Kw (2 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The PEDROLLO pumps of the HF medium flow rate line are recommended for civil and agricultural environments.
The PEDROLLO HF 70B has a flow rate ranging from 50 to 300 litres per minute with a head of 33 to 19 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 10.0
- Capacitor
- 45 µF450 VL
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 300
- Min head (m.)
- 19
- Max head (m.)
- 33
- Employments
- water supply, irrigation, cooling systems, transfer of tanks
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 230 V
- Height (cm)
- 26.9
- Width (cm)
- 21.6
- Depth (cm)
- 37.3
- Weight kg)
- 21.8
- Guarantee
- 2
HFm models and performances - Medium ranges
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 70C-70B-70A-5 BM-5 AM
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 HFm 70B - 2 HP Single Phase Centrifugal Electric PumpThis product Flow rate up to 300 l/min (18 m³/h). Head up to 33 m. 1.5 Kw (2 HP) motor. |  HFm 51B - Single-phase centrifugal electric pump 0.75 HPFlow rate up to 300 l/min (18 m³/h). Head up to 18.2 m. 0.55 Kw (0.75 HP) motor. |  HFm 70C - 1.5 HP Single Phase Centrifugal Electric PumpFlow rate up to 300 l/min (18 m³/h). Head up to 29 m. 1.1 Kw (1.5 HP) motor. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 1.5 | Power (Kw) -- | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 2 | Power (HP) 0.75 | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 10.0 | Absorption at 230V (A) 4.7 | Absorption at 230V (A) 8.0 |
| Capacitor | Capacitor 45 µF450 VL | Capacitor 20 µF450 VL | Capacitor 25 µF450 VL |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller Brass | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 300 | Max flow (l./min.) 300 | Max flow (l./min.) 300 |
| Min head (m.) | Min head (m.) 19 | Min head (m.) 5.4 | Min head (m.) 15 |
| Max head (m.) | Max head (m.) 33 | Max head (m.) 18.2 | Max head (m.) 29 |
| Employments | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
| Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
| Height (cm) | Height (cm) 26.9 | Height (cm) 22.5 | Height (cm) 26.9 |
| Width (cm) | Width (cm) 21.6 | Width (cm) 19 | Width (cm) 21.6 |
| Depth (cm) | Depth (cm) 37.3 | Depth (cm) 30 | Depth (cm) 37.3 |
| Weight kg) | Weight kg) 21.8 | Weight kg) 12.9 | Weight kg) 19 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
