HFm 5B - 1 HP Single Phase Centrifugal Electric Pump
Flow rate up to 500 l/min (30 m³/h). Head up to 13.2 m. 0.75 Kw (1 HP) motor.
The PEDROLLO pumps of the HF medium flow line are recommended for civil and agricultural environments.
The PEDROLLO HF 5B has a flow rate ranging from 100 to 500 litres per minute with a head from 13.2 to 5 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 4.9
- Capacitor
- 20 µF450 VL
- Suction mouth
- 2"
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 500
- Min head (m.)
- 5
- Max head (m.)
- 13.7
- Employments
- water supply, irrigation, cooling systems, transfer of tanks
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 230 V
- Height (cm)
- 23.8
- Width (cm)
- 6.31
- Depth (cm)
- 19.2
- Weight kg)
- 14.3
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side motor bearing | 6203 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | AR-14 |
LP diameter | 14 |
Fixed ring LP | Ceramic |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
HFm 5B - 1 HP Single Phase Centrifugal Electric PumpThis product Flow rate up to 500 l/min (30 m³/h). Head up to 13.2 m. 0.75 Kw (1 HP) motor. | HFm 5A - 1.5 HP Single Phase Centrifugal Electric PumpFlow rate up to 600 l/min (36 m³/h). Head up to 13.8 m. 1.1 Kw (1.5 HP) motor. | HFm 5BM - 1.5 HP Single Phase Centrifugal Electric PumpFlow rate up to 600 l/min (36 m³/h). Head up to 18.5 m. 1.1 Kw (1.5 HP) motor. | HFm 5AM - 2 HP Single Phase Centrifugal Electric PumpFlow rate up to 600 l/min (36 m³/h). Head up to 21.5 m. 1.5 Kw (2 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 1.5 | Motor power (HP) 1.5 | Motor power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) 4.9 | Absorption at 230V (A) 6.2 | Absorption at 230V (A) 7.7 | Absorption at 230V (A) 10.1 |
Capacitor | Capacitor 20 µF450 VL | Capacitor 25 µF450 VL | Capacitor 25 µF450 VL | Capacitor 45 µF450 VL |
Suction mouth | Suction mouth 2" | Suction mouth 2" | Suction mouth 2" | Suction mouth 2" |
Delivery port | Delivery port 2" | Delivery port 2" | Delivery port 2" | Delivery port 2" |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Brass | Impeller Brass | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
Max flow (l./min.) | Max flow (l./min.) 500 | Max flow (l./min.) 600 | Max flow (l./min.) 600 | Max flow (l./min.) 600 |
Min head (m.) | Min head (m.) 5 | Min head (m.) 3 | Min head (m.) 6 | Min head (m.) 10 |
Max head (m.) | Max head (m.) 13.7 | Max head (m.) 14.5 | Max head (m.) 19 | Max head (m.) 22 |
Employments | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 23.8 | Height (cm) 23.8 | Height (cm) 26 | Height (cm) 26 |
Width (cm) | Width (cm) 6.31 | Width (cm) 6.31 | Width (cm) 38.6 | Width (cm) 38.6 |
Depth (cm) | Depth (cm) 19.2 | Depth (cm) 19.2 | Depth (cm) 20.8 | Depth (cm) 20.8 |
Weight kg) | Weight kg) 14.3 | Weight kg) 14.6 | Weight kg) 19.2 | Weight kg) 21.6 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |