chevron_left chevron_right
-42%
NGA 1A - 1 HP three-phase open impeller centrifugal electric pump
Flow rate up to 400 l/min (24 m³/h). Head up to 20.5 m. 0.75 Kw (1 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The PEDROLLO pumps of the NGA line are recommended for pumping water and liquids that are chemically non-aggressive for the materials from which the pump is made.
The PEDROLLO NGA 1A has a flow rate ranging from 50 to 400 litres per minute with a head of 20.5 to 6 metres.
The open impeller design solution allows pumping fluids relatively loaded with impurities without the risk of clogging the impeller. For this feature, the NGA series pumps are used in industry, in the transfer of water from canals, rivers, tanks, basins, etc.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 3.7
- Absorption at 400V (A)
- 2.1
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 350
- Min head (m.)
- 6
- Max head (m.)
- 20
- Employments
- water supply, washing systems
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 22.7
- Width (cm)
- 29.7
- Depth (cm)
- 19
- Weight kg)
- 12.5
- Guarantee
- 2
NGA 1 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the NGA 1B-1A
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 14401 stainless steel (AISI 316) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 NGA 1A - 1 HP three-phase open impeller centrifugal electric pumpThis product Flow rate up to 400 l/min (24 m³/h). Head up to 20.5 m. 0.75 Kw (1 HP) motor. |  NGA 1B - 0.75 HP three-phase open impeller centrifugal electric pumpFlow rate up to 350 l/min (21 m³/h). Head up to 18 m. 0.55 Kw (0.75 HP) motor. |  NGA 2A - 1 HP three-phase open impeller centrifugal electric pumpFlow rate up to 550 l/min (33 m³/h). Head up to 11 m. 0.75 Kw (1 HP) motor. |  NGA 1A-PRO - 1 HP three-phase open impeller electric pumpFlow rate up to 400 l/min (24 m³/h). Head up to 20.5 m. 0.75 Kw (1 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 0.75 | Power (Kw) 0.55 | Power (Kw) 0.75 | Power (Kw) 0.75 |
| Power (HP) | Power (HP) 1 | Power (HP) 0.75 | Power (HP) 1 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 3.7 | Absorption at 230V (A) 3.3 | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 2.1 | Absorption at 400V (A) 1.9 | Absorption at 400V (A) -- | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 2" | Suction mouth 1 "1/2 |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 2" | Delivery port 1 "1/2 |
| Body Pump | Body Pump -- | Body Pump Cast iron | Body Pump Cast iron | Body Pump AISI 316 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 316 stainless steel | Impeller AISI 316 stainless steel | Impeller AISI 316 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 316 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 350 | Max flow (l./min.) 300 | Max flow (l./min.) 900 | Max flow (l./min.) 350 |
| Min head (m.) | Min head (m.) 6 | Min head (m.) 8 | Min head (m.) 8.5 | Min head (m.) 6 |
| Max head (m.) | Max head (m.) 20 | Max head (m.) 18 | Max head (m.) 19 | Max head (m.) 20 |
| Employments | Employments water supply, washing systems | Employments water supply, washing systems | Employments washing systems, water supply | Employments water supply, cooling systems, washing systems, water treatment plants |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C |
| Motor voltage | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 230 V, 400 V |
| Height (cm) | Height (cm) 22.7 | Height (cm) 22.7 | Height (cm) -- | Height (cm) 10.65pm |
| Width (cm) | Width (cm) 29.7 | Width (cm) 29.7 | Width (cm) -- | Width (cm) 29.9 |
| Depth (cm) | Depth (cm) 19 | Depth (cm) 19 | Depth (cm) -- | Depth (cm) 19 |
| Weight kg) | Weight kg) 12.5 | Weight kg) 12.5 | Weight kg) -- | Weight kg) 12.6 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
