NGA 3C - 2 HP three-phase open impeller centrifugal electric pump
Flow rate up to 770 l/min (46.2 m³/h). Head up to 14.4 m. 1.5 Kw (2 HP) motor.
The PEDROLLO pumps of the NGA line are recommended for pumping water and liquids that are chemically non-aggressive for the materials from which the pump is made.
The PEDROLLO NGA 3C has a flow rate ranging from 100 to 770 litres per minute with a head of 14.4 to 5.7 metres.
The open impeller design solution allows pumping fluids relatively full of impurities without the risk of clogging the impeller. For this feature, the NGA series pumps are used in industry, in the transfer of water from canals, rivers, tanks, basins, etc.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 2
- Suction mouth
- 2"
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- AISI 316 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 770
- Min head (m.)
- 5.7
- Max head (m.)
- 14.4
- Employments
- washing systems, water supply
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 230 V
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side motor bearing | 6204 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
Fixed ring LP | Graphite |
Rotating ring LP | Ceramic |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 250 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Cast iron GJL 250 EN 1561 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
NGA 3C - 2 HP three-phase open impeller centrifugal electric pumpThis product Flow rate up to 770 l/min (46.2 m³/h). Head up to 14.4 m. 1.5 Kw (2 HP) motor. | NGA 3D - 1.5 HP three-phase open impeller centrifugal electric pumpFlow rate up to 700 l/min (42 m³/h). Head up to 12 m. 1.1 Kw (1.5 HP) motor. | NGA 3A - 3 HP three-phase open impeller centrifugal electric pumpFlow rate up to 900 l/min (54 m³/h). Head up to 19 m. 2.2 Kw (3 HP) motor. | NGA 3B - 2.5 HP three-phase open impeller centrifugal electric pumpFlow rate up to 840 l/min (50.4 m³/h). Head up to 16.5 m. 1.8 Kw (2.5 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 2 | Motor power (HP) 1.5 | Motor power (HP) 3 | Motor power (HP) 2.5 |
Suction mouth | Suction mouth 2" | Suction mouth 2" | Suction mouth 2" | Suction mouth 2" |
Delivery port | Delivery port 2" | Delivery port 2" | Delivery port 2" | Delivery port 2" |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller AISI 316 stainless steel | Impeller AISI 316 stainless steel | Impeller AISI 316 stainless steel | Impeller AISI 316 stainless steel |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 |
Max flow (l./min.) | Max flow (l./min.) 770 | Max flow (l./min.) 700 | Max flow (l./min.) 900 | Max flow (l./min.) 840 |
Min head (m.) | Min head (m.) 5.7 | Min head (m.) 5 | Min head (m.) 8.5 | Min head (m.) 7 |
Max head (m.) | Max head (m.) 14.4 | Max head (m.) 12 | Max head (m.) 19 | Max head (m.) 16.5 |
Employments | Employments washing systems, water supply | Employments washing systems, water supply | Employments washing systems, water supply | Employments washing systems, water supply |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C |
Motor voltage | Motor voltage 230 V | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 400 V |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |