chevron_left chevron_right
WOOBEE-6 - 6 zone control unit for cockpit
For cockpit installation. Manages 6 irrigation zones. Bluetooth. With LCD display.
Telephone support for information before purchasing.
After-sales assistance in the correct use of the product.
Description
The WOOBEE-6 battery-operated controllers allow the effective use of automatic irrigation in the absence of 230 volt power.
Programming the device is quick and easy, thanks to the possibility of viewing all the programming functions on a single screen.
The WOOBEE-6 programmer can be installed almost anywhere. The waterproof casing guarantees a long life of the product even if installed in a valve box.
The device works for about one year if you use one 9-volt alkaline battery and for about two years if you use two 9-volt alkaline batteries.
Data sheet
- Number of zones
- 6
- Valves by sector
- 1
- Number of departures
- 6
- Number of programs
- 4
- LCD display
- Yes
- Wifi
- no
- Non-volatile memory
- Yes
- Remote control
- no
- Modular
- no
- Watertight
- Yes
- Assembly
- external
- Compatible with rain sensor
- Yes
- Supply
- battery
- Battery voltage (Volts)
- 9
- Number of batteries
- 2
- Overcurrent protection
- no
- Height (cm)
- 10.26
- Width (cm)
- 13.59
- Depth (cm)
- 6.15
- Weight kg)
- 0.90
- Guarantee
- 2
- Solenoid operation
- bistable
- Simultaneous programs
- Yes
- Odd and even day programming
- Yes
- Weekly programming
- Yes
JCR 1 models and performance
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the JCR 1 series
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | AR-12 |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 3.1 - Ejector group | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |