VXC 20/65-F - 2 HP three-phase VORTEX sewage pump
Flow rate up to 1000 l/min (60 m³/h). Head up to 7.4 m. 1.5 Kw (2 HP) motor.
The VXC series electric pumps, built in cast iron of considerable thickness and exceptional strength as well as resistance to abrasion and durability over time, are equipped with a VORTEX type impeller.
Suitable for draining waste water, water mixed with mud, liquids containing air or gas, as well as aerated and putrid sludge.
They are recommended for fixed installation in sewers, tunnels, wells, underground car parks, within special manholes.
- Motor connection
- THREE-PHASE
- Power (HP)
- 2
- Absorption at 400V (A)
- 4.2
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 200
- Max flow (l./min.)
- 1000
- Min head (m.)
- 1
- Max head (m.)
- 8.5
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 45.8
- Weight kg)
- 41.2
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6305 CM D 6 |
Opposite side engine bearing | 6204 ZZ-C3 |
Tree holding
Type of seal | Double Mechanical Seal in tandem with oil chamber |
Engine side model | STA-22 |
LM diameter | 22 |
LM fixed ring | Ceramic |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | STA-20 |
LP diameter | 20 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Cast iron GJL 200 EN 1561 |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
VXC 20/65-F - 2 HP three-phase VORTEX sewage pumpThis product Flow rate up to 1000 l/min (60 m³/h). Head up to 7.4 m. 1.5 Kw (2 HP) motor. | VXC 20/50-F - 2 HP three-phase VORTEX electric pump for waste waterFlow rate up to 700 l/min (42 m³/h) Head up to 12 m 1.5 Kw (2 HP) motor | VXC 30/50-F - 3 HP three-phase VORTEX electric pump for waste waterFlow rate up to 850 l/min (51 m³/h) Head up to 15 m 2.2 Kw (3 HP) motor | Bio Start 12-20-15 - Fertilizer for the lawn of 25 KgFor new sowing and overseeding. | |
---|---|---|---|---|
Nitrogen (N) | Nitrogen (N) -- | Nitrogen (N) -- | Nitrogen (N) -- | Nitrogen (N) 1 |
Phosphorus pentoxide (P) | Phosphorus pentoxide (P) -- | Phosphorus pentoxide (P) -- | Phosphorus pentoxide (P) -- | Phosphorus pentoxide (P) 20 |
Sulfur trioxide | Sulfur trioxide -- | Sulfur trioxide -- | Sulfur trioxide -- | Sulfur trioxide 18 |
Magnesium oxide | Magnesium oxide -- | Magnesium oxide -- | Magnesium oxide -- | Magnesium oxide 3 |
Potassium oxide (K) | Potassium oxide (K) -- | Potassium oxide (K) -- | Potassium oxide (K) -- | Potassium oxide (K) 15 |
Period of use | Period of use -- | Period of use -- | Period of use -- | Period of use All the year |
Action | Action -- | Action -- | Action -- | Action Starter |
Dosage | Dosage -- | Dosage -- | Dosage -- | Dosage 30-40 grams per square meter |
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection -- |
Power (HP) | Power (HP) 2 | Power (HP) 2 | Power (HP) 3 | Power (HP) -- |
Capacitor | Capacitor -- | Capacitor 20 µF450 VL | Capacitor -- | Capacitor -- |
Absorption at 400V (A) | Absorption at 400V (A) 4.2 | Absorption at 400V (A) 4.2 | Absorption at 400V (A) 5.7 | Absorption at 400V (A) -- |
Delivery port | Delivery port 3 " | Delivery port 2 "1/2 | Delivery port 2 "1/2 | Delivery port -- |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump -- |
Impeller | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron | Impeller -- |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers -- |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft -- |
Check valve | Check valve no | Check valve no | Check valve no | Check valve -- |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection -- |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) -- |
Max flow (l./min.) | Max flow (l./min.) 1000 | Max flow (l./min.) 700 | Max flow (l./min.) 850 | Max flow (l./min.) -- |
Min head (m.) | Min head (m.) 1 | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) -- |
Max head (m.) | Max head (m.) 8.5 | Max head (m.) 13 | Max head (m.) 16 | Max head (m.) -- |
Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) -- |
Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments -- |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) -- |
Typology | Typology -- | Typology -- | Typology -- | Typology Pre-sowing, Overseed |
Consistency | Consistency -- | Consistency -- | Consistency -- | Consistency granular |
Release | Release -- | Release -- | Release -- | Release scheduled |
Height (cm) | Height (cm) 45.8 | Height (cm) 44.2 | Height (cm) 44.2 | Height (cm) -- |
Weight kg) | Weight kg) 41.2 | Weight kg) 36.7 | Weight kg) 38.7 | Weight kg) 25 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee -- |