chevron_left
chevron_right
-45%
FCRm 130/3 - 1.5 HP single-phase multi-impeller electric pump
With stainless steel impeller. Flow rate up to 130 l/min (7.8 m³/h). Head up to 49 m. Motor 1.1 Kw (1.5 HP).
Variants:
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The Pedrollo FCRm 130/3 multi-impeller electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to its reliability and silence, it is widely used in the domestic sector and in particular for the distribution of water in combination with small or medium-sized pressure tanks, for the irrigation of vegetable gardens or gardens, etc.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- SINGLE-PHASE
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8.5
- Capacitor
- 31.5 µF 450 VL
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 130
- Min. head (m.)
- 24
- Max. head (m.)
- 49
- Jobs
- irrigation
- Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 22.8
- Width (cm)
- 44.5
- Depth (cm)
- 18.5
- Weight (Kg)
- 18.1
- Warranty (years)
- 2
Construction data of the FCR-90-FCR-130-FCR 200
Bearings
| Pump side motor bearing | 6304 2RS-C3 |
| Opposite side motor bearing | 6204 ZZ-C3E |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Models and performances FCRm 90-130
Compare with Similar Products
FCRm 130/3 - 1.5 HP single-phase multi-impeller electric pumpThis product With stainless steel impeller. Flow rate up to 130 l/min (7.8 m³/h). Head up to 49 m. Motor 1.1 Kw (1.5 HP). |
5CPm 100-I - 1.5 HP single-phase multi-impeller electric pumpFlow rate up to 130 l/min (7.8 m³/h). Head up to 63 m. 1.1 Kw (1.5 HP) motor. |
MKm 5/5 - 1.5 HP single-phase vertical multistage electric pumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 71 m. Motor 1.1 Kw (1.5 HP). |
|
|---|---|---|---|
| Price |
Price
€854.00
-45%
€469.70
|
Price
€412.36
-42%
€239.17
|
Price
€779.58
-42%
€452.16
|
| Motor connection | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE |
| Power (Kw) | Power (Kw) -- | Power (Kw) -- | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1.5 | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 8.5 | Absorption at 230V (A) 6.6 | Absorption at 230V (A) 8.5 |
| Capacitor | Capacitor 31.5 µF 450 VL | Capacitor 20 µF 450 VL | Capacitor 25 µF 450 VL |
| Suction mouth | Suction mouth 1" 1/4 | Suction mouth 1" | Suction mouth 1" 1/4 |
| Delivery mouth | Delivery mouth 1" | Delivery mouth 1" | Delivery mouth 1" |
| Pump body | Pump body AISI 304 stainless steel | Pump body Cast iron | Pump body AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller Noryl |
| Number of impellers | Number of impellers 3 | Number of impellers 5 | Number of impellers 5 |
| Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve No | Check valve No | Check valve No |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 5 | Minimum flow rate (l./min.) 5 | Minimum flow rate (l./min.) 20 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 130 | Max. flow rate (l./min.) 130 | Max. flow rate (l./min.) 120 |
| Min. head (m.) | Min. head (m.) 24 | Min. head (m.) 8 | Min. head (m.) 21.5 |
| Max. head (m.) | Max. head (m.) 49 | Max. head (m.) 63 | Max. head (m.) 71 |
| Jobs | Jobs irrigation | Jobs water supply, pressurization systems, irrigation | Jobs water supply, pressurization systems, irrigation, washing systems, fire prevention systems |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C |
| Height (cm) | Height (cm) 22.8 | Height (cm) 19.1 | Height (cm) 50.4 |
| Width (cm) | Width (cm) 44.5 | Width (cm) 15.8 | Width (cm) 18.5 |
| Depth (cm) | Depth (cm) 18.5 | Depth (cm) 35.6 | Depth (cm) 22.3 |
| Weight (Kg) | Weight (Kg) 18.1 | Weight (Kg) 13.4 | Weight (Kg) 19.9 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |
Related Products
-
ASS14FL0002 - Flange kit DN...
Threaded 1 1/4" X 1". For FCR 90, FCR 130, FCR 200 and FCR 240.
€69.54 -36% €44.51
Those products may also interest you
-
- -36%
€44.51 tax incl. €69.54
From the same brand and category
