chevron_left chevron_right
5CP 100-I - 1.5 HP three-phase multi-impeller electric pump
Flow rate up to 130 l/min (7.8 m³/h). Head up to 63 m. 1.1 Kw (1.5 HP) motor.
After-sales assistance for product installation.
Telephone support for information before purchasing.
We supply all spare parts on this product.
Description
They are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to their reliability and silence, they are widely used in the domestic sector and in particular for the distribution of water in combination with small or medium-sized pressure tanks, for the irrigation of vegetable gardens or gardens, etc.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1.5
- Absorption at 230V (A)
- 4.3
- Absorption at 400V (A)
- 2.5
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 5
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 130
- Min head (m.)
- 8
- Max head (m.)
- 63
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 19.1
- Width (cm)
- 38.2
- Depth (cm)
- 15.8
- Weight kg)
- 15.8
- Guarantee
- 2
Models and performances 2-5CP-I
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data 5CP 80-I 4CP 100-I 5CP 100-I
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-13 |
| LP diameter | 13 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shim Ring | POM acetal resin |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 5CP 100-I - 1.5 HP three-phase multi-impeller electric pumpThis product Flow rate up to 130 l/min (7.8 m³/h). Head up to 63 m. 1.1 Kw (1.5 HP) motor. |  5CP 80-I - 1 HP three-phase multi-impeller electric pumpFlow rate up to 80 l/min (4.8 m³/h). Head up to 67 m. 0.75 Kw (1 HP) motor. |  3CP 100-I - 0.75 HP three-phase multi-impeller electric pumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 38 m. 0.55 Kw (0.75 HP) motor. |  4CP 100-I - 1 HP three-phase multi-impeller electric pumpFlow rate up to 130 l/min (7.8 m³/h). Head up to 46 m. 0.75 Kw (1 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 1 | Motor power (HP) 0.75 | Motor power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 4.3 | Absorption at 230V (A) 4.3 | Absorption at 230V (A) 3.4 | Absorption at 230V (A) 4.5 |
| Absorption at 400V (A) | Absorption at 400V (A) 2.5 | Absorption at 400V (A) 2.5 | Absorption at 400V (A) 2.0 | Absorption at 400V (A) 2.6 |
| Suction mouth | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 5 | Number of impellers 5 | Number of impellers 3 | Number of impellers 4 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 130 | Max flow (l./min.) 80 | Max flow (l./min.) 120 | Max flow (l./min.) 130 |
| Min head (m.) | Min head (m.) 8 | Min head (m.) 12 | Min head (m.) 5 | Min head (m.) 5 |
| Max head (m.) | Max head (m.) 63 | Max head (m.) 67 | Max head (m.) 38 | Max head (m.) 50 |
| Employments | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 19.1 | Height (cm) 17.2 | Height (cm) 17.2 | Height (cm) 19.1 |
| Width (cm) | Width (cm) 38.2 | Width (cm) 38.2 | Width (cm) 15.8 | Width (cm) 15.8 |
| Depth (cm) | Depth (cm) 15.8 | Depth (cm) 15.8 | Depth (cm) 30.7 | Depth (cm) 35.6 |
| Weight kg) | Weight kg) 15.8 | Weight kg) 15.1 | Weight kg) 9.9 | Weight kg) 13.4 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
