chevron_left chevron_right
-45%
FCRm 200/5 - 2.5 HP single-phase multi-impeller electric pump
With stainless steel impellers. Flow rate up to 200 l/min (12 m³/h). Head up to 73 m. Motor 1.8 Kw (2.5 HP).
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The Pedrollo FCRm 200/5 multi-impeller pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to its reliability and silence, it is widely used in the domestic sector and in particular for the distribution of water in combination with small or medium-sized pressure tanks, for the irrigation of vegetable gardens or gardens, etc.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 2.5
- Absorption at 230V (A)
- 12.5
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 5
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 200
- Min head (m.)
- 22
- Max head (m.)
- 73
- Employments
- irrigation
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 22.8
- Width (cm)
- 51.7
- Depth (cm)
- 18.5
- Weight kg)
- 23.7
- Guarantee
- 2
Models and performance FCRm 200-240
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the FCR-90-FCR-130-FCR 200
Bearings
| Pump side motor bearing | 6304 2RS-C3 |
| Opposite side motor bearing | 6204 ZZ-C3E |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 FCRm 200/5 - 2.5 HP single-phase multi-impeller electric pumpThis product With stainless steel impellers. Flow rate up to 200 l/min (12 m³/h). Head up to 73 m. Motor 1.8 Kw (2.5 HP). |  FCRm 200/4 - 2 HP single-phase multi-impeller electric pumpWith stainless steel impellers. Flow rate up to 200 l/min (12 m³/h). Head up to 58 m. Motor 1.5 Kw (2 HP). |  FCRm 240/3 - 2 HP single-phase multi-impeller electric pumpFlow rate up to 240 l/min (14.4 m³/h). Head up to 77 m. 1.5 Kw (2 HP) motor. |  FCRm 240/4 - 2.5 HP single-phase multi-impeller electric pumpFlow rate up to 240 l/min (14.4 m³/h). Head up to 62 m. 2 Kw (2.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) -- | Power (Kw) -- | Power (Kw) 1.5 | Power (Kw) -- |
| Power (HP) | Power (HP) 2.5 | Power (HP) 2 | Power (HP) 2 | Power (HP) 2.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 12.5 | Absorption at 230V (A) 10.5 | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Capacitor | Capacitor -- | Capacitor 45 µF450 VL | Capacitor -- | Capacitor -- |
| Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump -- |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller -- | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 5 | Number of impellers 4 | Number of impellers 2 | Number of impellers 2 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 200 | Max flow (l./min.) 200 | Max flow (l./min.) -- | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) 22 | Min head (m.) 17 | Min head (m.) -- | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 73 | Max head (m.) 58 | Max head (m.) -- | Max head (m.) 10 |
| Employments | Employments irrigation | Employments irrigation | Employments irrigation | Employments irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) , +40°C |
| Motor voltage | Motor voltage -- | Motor voltage -- | Motor voltage 230 V | Motor voltage 230 V |
| Height (cm) | Height (cm) 22.8 | Height (cm) 22.8 | Height (cm) -- | Height (cm) 31.8 |
| Width (cm) | Width (cm) 51.7 | Width (cm) 47.1 | Width (cm) -- | Width (cm) 20.5 |
| Depth (cm) | Depth (cm) 18.5 | Depth (cm) 18.5 | Depth (cm) -- | Depth (cm) -- |
| Weight kg) | Weight kg) 23.7 | Weight kg) 20.4 | Weight kg) -- | Weight kg) 6.8 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
