FCRm 240/4 - 2.5 HP single-phase multi-impeller electric pump
Flow rate up to 240 l/min (14.4 m³/h). Head up to 62 m. 2 Kw (2.5 HP) motor.
The FCRm 240/4 multi-impeller electric pump is recommended for irrigation of domestic environments.
This pump is recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The pump has a very simple operation, the impellers are activated and thanks to their movement they pump the water into the pump body.
The FCRm 240/4 is equipped with multiple large impellers. Thanks to this feature, the pump is ideal for domestic environments such as vegetable gardens or gardens due to its silence.
The flow rate ranges from 20 to 240 liters per minute. The head ranges from 15.5 to 62.5 meters.
This pump has a 1¼" suction port and a 1" discharge port.
The FCRm 240/4 must be powered by a single-phase voltage, has a horsepower of 2.5 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
The pump body, the impeller and the motor shaft are made of AISI 304 stainless steel and this gives the pump good strength and resistance.
The FCRm 240/4 must be installed indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 2.5
- Absorption at 230V (A)
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 2
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- Min head (m.)
- 2
- Max head (m.)
- 10
- Employments
- irrigation
- Liquid temperature max. (° C)
- +40°C,
- Motor voltage
- 230 V
- Height (cm)
- 31.8
- Width (cm)
- 20.5
- Depth (cm)
- Weight kg)
- 6.8
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6304 2RS-C3 |
Opposite side motor bearing | 6204 ZZ-C3E |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
Fixed ring LP | Graphite |
Rotating ring LP | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
5.2 - Shim Ring | PTFE |
6.0 - Motor holder | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
FCRm 240/4 - 2.5 HP single-phase multi-impeller electric pumpThis product Flow rate up to 240 l/min (14.4 m³/h). Head up to 62 m. 2 Kw (2.5 HP) motor. | FCRm 200/5 - 2.5 HP single-phase multi-impeller electric pumpWith stainless steel impellers. Flow rate up to 200 l/min (12 m³/h). Head up to 73 m. Motor 1.8 Kw (2.5 HP). | FCRm 240/3 - 2 HP single-phase multi-impeller electric pumpFlow rate up to 240 l/min (14.4 m³/h). Head up to 77 m. 1.5 Kw (2 HP) motor. | copy of FCRm 240/4 - 2 HP single-phase multi-impeller electric pumpFlow rate up to 240 l/min (14.4 m³/h). Head up to 62 m. 2 Kw (2.5 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (Kw) | Motor power (Kw) -- | Motor power (Kw) -- | Motor power (Kw) 1.5 | Motor power (Kw) -- |
Motor power (HP) | Motor power (HP) 2.5 | Motor power (HP) 2.5 | Motor power (HP) 2 | Motor power (HP) 3 |
Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) 12.5 | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 |
Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
Body Pump | Body Pump -- | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump -- |
Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller -- | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers 2 | Number of impellers 5 | Number of impellers 2 | Number of impellers 2 |
Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 20 |
Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) 200 | Max flow (l./min.) -- | Max flow (l./min.) -- |
Min head (m.) | Min head (m.) 2 | Min head (m.) 22 | Min head (m.) -- | Min head (m.) 2 |
Max head (m.) | Max head (m.) 10 | Max head (m.) 73 | Max head (m.) -- | Max head (m.) 10 |
Employments | Employments irrigation | Employments irrigation | Employments irrigation | Employments irrigation |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +40°C, | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) +40°C, |
Motor voltage | Motor voltage 230 V | Motor voltage -- | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 31.8 | Height (cm) 22.8 | Height (cm) -- | Height (cm) 31.8 |
Width (cm) | Width (cm) 20.5 | Width (cm) 51.7 | Width (cm) -- | Width (cm) 20.5 |
Depth (cm) | Depth (cm) -- | Depth (cm) 18.5 | Depth (cm) -- | Depth (cm) -- |
Weight kg) | Weight kg) 6.8 | Weight kg) 23.7 | Weight kg) -- | Weight kg) 6.8 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |