HTm 10/3 - 2 HP single-phase vertical multistage electric pump
Flow rate up to 250 l/min (12 m³/h). Head up to 47 m. Motor 1.5 Kw (2 HP).
The HTm 10/3 multi-impeller centrifugal electric pump by Pedrollo is ideal for applications in the domestic, civil, agricultural and industrial fields.
Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The HTm 10/3 electric pump is designed to guarantee high hydraulic performance combined with a robust, compact and reliable mechanical construction.
The high efficiency and adaptability to the most varied applications make it suitable for the distribution of water in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
The flow rate ranges from 30 to 250 liters per minute. The head ranges from 13 to 47 meters.
The HTm 10/3 must be powered by a single-phase voltage, has a horsepower of 2 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.
The pump is made of steel, including the 3 impellers, and cast iron which guarantee a long life and high performance of the pump.
With the multi-stage construction, the operating noise is particularly low.
The HTm 10/3 must be installed indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Motor power (Kw)
- 1.1
- Motor power (HP)
- 1.5
- Absorption at 230V (A)
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- Max flow (l./min.)
- Min head (m.)
- Max head (m.)
- Employments
- water supply, fire prevention systems, washing systems, pressurization systems, irrigation
- Liquid temperature max. (° C)
- Motor voltage
- 230 V
- Height (cm)
- Width (cm)
- Depth (cm)
- Weight kg)
- Guarantee
- 2
Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 250 EN 1561 |
| 2.0 - Lid | Cast iron GJL 250 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 HTm 10/3 - 2 HP single-phase vertical multistage electric pumpThis product Flow rate up to 250 l/min (12 m³/h). Head up to 47 m. Motor 1.5 Kw (2 HP). |  HTm 8/6 - 3 HP single-phase vertical multistage electric pumpFlow rate up to 200 l/min (12 m³/h). Head up to 85.5 m. Motor 2.2 Kw (3 HP). |  HTm 10/4 - 2.5 HP single-phase vertical multistage electric pumpFlow rate up to 250 l/min (12 m³/h). Head up to 62 m. Motor 2 Kw (2.5 HP). |  HTm 10/5 - 3 HP single-phase vertical multistage electric pumpFlow rate up to 250 l/min (12 m³/h). Head up to 77 m. Motor 2.2 Kw (3 HP). | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (Kw) | Motor power (Kw) 1.1 | Motor power (Kw) -- | Motor power (Kw) 2.2 | Motor power (Kw) 2.2 |
| Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 3 | Motor power (HP) 3 | Motor power (HP) 3 |
| Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 3 | Number of impellers 3 | Number of impellers 3 | Number of impellers 3 |
| Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft -- | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection -- | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) 80 | Max flow (l./min.) -- | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) -- | Min head (m.) 28 | Min head (m.) -- | Min head (m.) -- |
| Max head (m.) | Max head (m.) -- | Max head (m.) 52 | Max head (m.) -- | Max head (m.) -- |
| Employments | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation | Employments fire prevention systems, washing systems, irrigation, pressurization systems, water supply | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- |
| Motor voltage | Motor voltage 230 V | Motor voltage -- | Motor voltage 230 V | Motor voltage 230 V |
| Height (cm) | Height (cm) -- | Height (cm) -- | Height (cm) -- | Height (cm) -- |
| Width (cm) | Width (cm) -- | Width (cm) -- | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
| Weight kg) | Weight kg) -- | Weight kg) -- | Weight kg) -- | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |