HT 10/4 - 2.5 HP three-phase vertical multistage electric pump
Flow rate up to 250 l/min (12 m³/h). Head up to 62 m. Motor 2 Kw (2.5 HP).
The Pedrollo HT 10/4 multi-impeller centrifugal electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
This electric pump is designed to guarantee high hydraulic performance combined with a robust, compact and reliable mechanical construction.
The high efficiency and adaptability to the most varied applications make the HT 10/4 ideal for applications in the domestic, civil and agricultural fields, in particular for the distribution of water in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
The flow rate ranges from 30 to 250 liters per minute. The head ranges from 18 to 62 meters.
The HT 10/4 must be powered by a three-phase voltage, has a horsepower of 2.5 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.
The pump is made of steel, including the 3 impellers, and cast iron which guarantee a long life and high performance of the pump.
With the multi-stage construction, the operating noise is particularly low.
The HT 10/4 must be installed indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Motor power (Kw)
- 2.2
- Motor power (HP)
- 3
- Absorption at 230V (A)
- Absorption at 400V (A)
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- Max flow (l./min.)
- Min head (m.)
- Max head (m.)
- Employments
- water supply, fire prevention systems, washing systems, pressurization systems, irrigation
- Liquid temperature max. (° C)
- Motor voltage
- 230 V, 400 V
- Height (cm)
- Width (cm)
- Depth (cm)
- Weight kg)
- Guarantee
- 2
Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 250 EN 1561 |
| 2.0 - Lid | Cast iron GJL 250 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 HT 10/4 - 2.5 HP three-phase vertical multistage electric pumpThis product Flow rate up to 250 l/min (12 m³/h). Head up to 62 m. Motor 2 Kw (2.5 HP). |  HT 10/3 - 2 HP three-phase vertical multistage electric pumpFlow rate up to 250 l/min (12 m³/h). Head up to 47 m. Motor 1.5 Kw (2 HP). |  HT 10/5 - 3 HP three-phase vertical multistage electric pumpFlow rate up to 250 l/min (12 m³/h). Head up to 77 m. Motor 2.2 Kw (3 HP). |  HT 10/6 - 4 HP three-phase vertical multistage electric pumpFlow rate up to 250 l/min (12 m³/h). Head up to 93 m. 3 Kw (4 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (Kw) | Motor power (Kw) 2.2 | Motor power (Kw) 1.1 | Motor power (Kw) 2.2 | Motor power (Kw) 3 |
| Motor power (HP) | Motor power (HP) 3 | Motor power (HP) 1.5 | Motor power (HP) 3 | Motor power (HP) 4 |
| Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 3 | Number of impellers 3 | Number of impellers 3 | Number of impellers 3 |
| Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) -- | Min head (m.) -- | Min head (m.) -- | Min head (m.) -- |
| Max head (m.) | Max head (m.) -- | Max head (m.) -- | Max head (m.) -- | Max head (m.) -- |
| Employments | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- |
| Motor voltage | Motor voltage 230 V, 400 V | Motor voltage 230 V, 400 V | Motor voltage 230 V, 400 V | Motor voltage 230 V, 400 V |
| Height (cm) | Height (cm) -- | Height (cm) -- | Height (cm) -- | Height (cm) -- |
| Width (cm) | Width (cm) -- | Width (cm) -- | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
| Weight kg) | Weight kg) -- | Weight kg) -- | Weight kg) -- | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |