MKm 8/5 - 2.5 HP single-phase vertical multistage electric pump
Flow rate up to 180 l/min (10.8 m³/h) Head up to 70 m Motor 1.8 Kw (2.5 HP)
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with autoclave tanks, increasing the pressure in the network.
They are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 2.5
- Absorption at 230V (A)
- 9.5
- Capacitor
- 45 µF450 VL
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 5
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 40
- Max flow (l./min.)
- 180
- Min head (m.)
- 18
- Max head (m.)
- 70
- Employments
- water supply, pressurization systems, irrigation, washing systems, fire prevention systems
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 50.4
- Width (cm)
- 18.5
- Depth (cm)
- 22.3
- Weight kg)
- 23.6
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6304 ZZ |
Opposite side engine bearing | 6204 ZZ |
Tree holding
Type of seal | Single Mechanical Seal |
Shrinkage DN1=450 DN2=350 | FN-18 |
LP diameter | 18 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.1 - Suction Body | Cast iron GJL 200 EN 1561 |
1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
5.2 - Wear ring | PTFE |
5.3 - Diaphragm/Diffuser Cover | Stainless steel EN 1.4301 (AISI 304) |
6.0 - Motor holder | EN-AB 46100 aluminium |
7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
MKm 8/5 - 2.5 HP single-phase vertical multistage electric pumpThis product Flow rate up to 180 l/min (10.8 m³/h) Head up to 70 m Motor 1.8 Kw (2.5 HP) | MKm 5/8 - 3 HP single-phase vertical multistage electric pumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 112 m. Motor 2.2 Kw (3 HP). | MKm 8/4 - 2 HP single-phase vertical multistage electric pumpFlow rate up to 180 l/min (10.8 m³/h). Head up to 56 m. Motor 1.5 Kw (2 HP). | MKm 8/6 - 3 HP single-phase vertical multistage electric pumpFlow rate up to 180 l/min (10.8 m³/h) Head up to 86 m Motor 2.2 Kw (3 HP) | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 2.5 | Motor power (HP) 3 | Motor power (HP) 2 | Motor power (HP) 3 |
Absorption at 230V (A) | Absorption at 230V (A) 9.5 | Absorption at 230V (A) 11.5 | Absorption at 230V (A) 8.5 | Absorption at 230V (A) 11.5 |
Capacitor | Capacitor 45 µF450 VL | Capacitor 50 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor -- |
Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 |
Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Noryl |
Number of impellers | Number of impellers 5 | Number of impellers 8 | Number of impellers 4 | Number of impellers 6 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 40 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 40 | Flow rate min. (l./min.) 40 |
Max flow (l./min.) | Max flow (l./min.) 180 | Max flow (l./min.) 120 | Max flow (l./min.) 180 | Max flow (l./min.) 180 |
Min head (m.) | Min head (m.) 18 | Min head (m.) 40 | Min head (m.) 15 | Min head (m.) 20 |
Max head (m.) | Max head (m.) 70 | Max head (m.) 112 | Max head (m.) 56 | Max head (m.) 86 |
Employments | Employments water supply, pressurization systems, irrigation, washing systems, fire prevention systems | Employments water supply, pressurization systems, irrigation, washing systems, fire prevention systems | Employments -- | Employments water supply, pressurization systems, irrigation, washing systems, fire prevention systems |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 50.4 | Height (cm) 58.5 | Height (cm) 47.7 | Height (cm) 53.1 |
Width (cm) | Width (cm) 18.5 | Width (cm) 18.5 | Width (cm) 18.5 | Width (cm) 18.5 |
Depth (cm) | Depth (cm) 22.3 | Depth (cm) 22.3 | Depth (cm) 22.3 | Depth (cm) 22.3 |
Weight kg) | Weight kg) 23.6 | Weight kg) 24.8 | Weight kg) 22 | Weight kg) 24 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |