Active Driver Plus M/M 1.5 - 11 A OUTLET single-phase inverter
Active Driver Plus M/M 1.5 is an inverter for the control and command of single-phase hydraulic pumps and finds its natural application in constant pressure pumping systems, both domestic, industrial and agricultural.
Innovative thanks to dual processor technology and extremely compact, Active Driver Plus M/M 1.5 ensures new ease of installation thanks to the simple wizard.
It ensures maximum levels of comfort thanks to the always constant pressure. Constant pressure is achieved by controlling the speed of the pump and running it at the minimum speed, which ensures the required pressure and flow. This ensures a significant reduction in energy consumption, noise and extension of the life of the pump.
The Active Driver starts the pump at the first request for water.
The speed of the pump is regulated (continuously) to the minimum value capable of satisfying the user's request. This allows for significant energy savings. If installed in a group, the starting of the second and third pump occurs in cascade, when the first pump reaches the maximum rotation speed.
The pressure can be adjusted by the user via two + and - buttons located on Active Driver (generally all pumps are set at the same pressure value).
The pumps are automatically stopped in the following cases:
- Pump overcurrent
- Dry running
- Low supply voltage
- Exceeding a maximum pressure value (adjustable)
- Active Driver Plus electronic components overheating.
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "1/2
- Degree of protection
- IP 55
- Max flow (l./min.)
- 300
- Line power supply
- single phase
- Supply voltage (Volt)
- 230
- Line current
- 13
- Line phases
- 1 x 230 V
- Motor power supply
- single phase
- Motor voltage
- 230 V
- Motor phase current
- 11
- Engine phases
- 1 x 230 V
- Amperometric
- Yes
- Short circuit between phases
- Yes
- Dry running
- Yes
- Height (cm)
- 28.2
- Width (cm)
- 23.7
- Depth (cm)
- 18.4
- Guarantee
- 2