JSW 2A - 1.25 HP Three-Phase Self-Priming Electric Pump OUTLET
Flow rate up to 70 l/min (4.2 m³/h). Head up to 55 m. Motor 0.9 Kw (1.25 HP).
The Pedrollo JSW 2A self-priming electric pump is designed to suck water even in the presence of air mixed with the pumped liquid.
Due to its reliability and ease of use, it is recommended for pumping clean water in domestic applications, especially for distributing water in conjunction with small or medium-sized pressure tanks, for irrigating vegetable gardens and gardens, etc.
The suction capacity of the JSW 2A is up to 9 metres.
The flow rate ranges from 5 to 75 liters per minute. The head ranges from 28 to 55 meters.
It must be powered by a three-phase voltage, has a horsepower of 1.25 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +40.
The JSW 2A is made of materials such as cast iron, noryl and AISI 431 stainless steel which give the pump good strength and resistance.
Installation must be carried out in well-ventilated closed places or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Absorption at 230V (A)
- Absorption at 400V (A)
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- Max flow (l./min.)
- Min head (m.)
- Max head (m.)
- Employments
- water supply, fire prevention systems, washing systems, pressurization systems, irrigation, transfer of tanks
- Liquid temperature max. (° C)
- Height (cm)
- Width (cm)
- Depth (cm)
- Weight kg)
- Guarantee
- 2
