PK 65 - 0.75 HP three-phase peripheral impeller electric pump
Flow rate up to 50 l/min (3 m³/h). Head up to 50 m. 0.55 Kw (0.75 HP) motor.
The Pedrollo PK 65 peripheral electric pump is suitable for irrigation of vegetable gardens and gardens.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
Suitable for water distribution in conjunction with small pressure tanks.
The flow rate ranges from 5 to 50 litres per hour and the head ranges from 8 to 50 metres.
The PK 65 pump has the advantage of being small and compact. Compared to the previous version, the pump is 20% less noisy.
Compared to the previous model, the new version is less noisy.
In production for over 50 years and with millions of units sold, it is the most economical and versatile product produced by Pedrollo .
The PK 65 must be installed indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3
- Absorption at 400V (A)
- 1.7
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 50
- Min head (m.)
- 8
- Max head (m.)
- 55
- Employments
- water supply
- Liquid temperature max. (° C)
- +60°C
- Motor voltage
- 230 V, 400 V
- Height (cm)
- 15.3
- Width (cm)
- 23.7
- Depth (cm)
- 10
- Weight kg)
- 6.6
- Guarantee
- 2
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | DX53D EN 10346 galvanized steel |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PK 65 - 0.75 HP three-phase peripheral impeller electric pumpThis product Flow rate up to 50 l/min (3 m³/h). Head up to 50 m. 0.55 Kw (0.75 HP) motor. |  PK 60 - 0.50 HP three-phase peripheral impeller electric pumpFlow rate up to 40 l/min (2.4 m³/h). Head up to 38 m. 0.37 Kw (0.50 HP) motor. |  PK 80 - 1 HP three-phase peripheral impeller electric pumpFlow rate up to 50 l/min (3 m³/h). Head up to 66 m. 0.75 Kw (1 HP) motor | |
|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 0.55 | Power (Kw) 0.30 | Power (Kw) 0.75 |
| Power (HP) | Power (HP) 0.75 | Power (HP) 0.40 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 3 | Absorption at 230V (A) 2 | Absorption at 230V (A) 3.8 |
| Absorption at 400V (A) | Absorption at 400V (A) 1.7 | Absorption at 400V (A) 1.15 | Absorption at 400V (A) 2.2 |
| Suction mouth | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller Brass | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 50 | Max flow (l./min.) 40 | Max flow (l./min.) 50 |
| Min head (m.) | Min head (m.) 8 | Min head (m.) 5 | Min head (m.) 22 |
| Max head (m.) | Max head (m.) 55 | Max head (m.) 40 | Max head (m.) 70 |
| Employments | Employments water supply | Employments water supply | Employments water supply |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) +60°C |
| Motor voltage | Motor voltage 230 V, 400 V | Motor voltage 230 V, 400 V | Motor voltage 230 V, 400 V |
| Height (cm) | Height (cm) 15.3 | Height (cm) 14.5 | Height (cm) 17.9 |
| Width (cm) | Width (cm) 23.7 | Width (cm) 20.8 | Width (cm) 28.5 |
| Depth (cm) | Depth (cm) 10 | Depth (cm) 9.4 | Depth (cm) 11.2 |
| Weight kg) | Weight kg) 6.6 | Weight kg) 5.2 | Weight kg) 10 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
