PKm 100 - 1.5 HP single-phase peripheral impeller electric pump
Flow rate up to 70 l/min (4.2 m³/h). Head up to 80 m. 1.1 Kw (1.5 HP) motor.
The Pedrollo PKm 100 peripheral electric pump is suitable for irrigating vegetable gardens and gardens.
Suitable for water distribution in conjunction with small pressure tanks.
Convenient for home use, the PKm 100 is a compact electric pump.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The noise level has been reduced by 20% compared to the previous version.
The PKm 100, unlike the PK 90 model, returns to having the 3/4 inch suction and delivery ports.
The flow rate ranges from 5 to 70 litres per hour and the head from 15 to 80 metres.
Made with high quality materials and components, such as cast iron, steel, aluminum and brass, this pump is durable and reliable.
Certified IP44, the PKm 100 is resistant to water and dust.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 9
- Capacitor
- 31.5 µF450 VL
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 70
- Min head (m.)
- 15
- Max head (m.)
- 85
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- +60°C
- Motor voltage
- 230 V
- Height (cm)
- 21.2
- Width (cm)
- 35.6
- Depth (cm)
- 15.2
- Weight kg)
- 14.4
- Guarantee
- 2
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-14 |
| LP diameter | 14 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PKm 100 - 1.5 HP single-phase peripheral impeller electric pumpThis product Flow rate up to 70 l/min (4.2 m³/h). Head up to 80 m. 1.1 Kw (1.5 HP) motor. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 9 |
| Capacitor | Capacitor 31.5 µF450 VL |
| Suction mouth | Suction mouth 1 " |
| Delivery port | Delivery port 1 " |
| Impeller | Impeller Brass |
| Number of impellers | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no |
| Degree of protection | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 70 |
| Min head (m.) | Min head (m.) 15 |
| Max head (m.) | Max head (m.) 85 |
| Employments | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +60°C |
| Motor voltage | Motor voltage 230 V |
| Height (cm) | Height (cm) 21.2 |
| Width (cm) | Width (cm) 35.6 |
| Depth (cm) | Depth (cm) 15.2 |
| Weight kg) | Weight kg) 14.4 |
| Guarantee | Guarantee 2 |
