PKm 80 - 1 HP single-phase peripheral impeller electric pump
Flow rate up to 50 l/min (3 m³/h). Head up to 66 m. 0.75 Kw (1 HP) motor.
The Pedrollo PKm 80 peripheral electric pump is a convenient solution for irrigating vegetable gardens and gardens.
Produced for over 50 years and with millions of units sold, it is the most economical and versatile product produced by Pedrollo .
The small size and low weight make the PKm 80 suitable for home use.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The flow rate is from 5 to 50 liters per minute. The head is from 5 to 50 meters.
Suitable for water distribution in conjunction with small pressure tanks.
The PKm 80 must be installed indoors without exposing it to the elements.
- Motor connection
- SINGLE PHASE
- Motor power (Kw)
- 0.75
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 5.2
- Capacitor
- 20 µF450 VL
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 50
- Min head (m.)
- 22
- Max head (m.)
- 66
- Employments
- water supply
- Liquid temperature max. (° C)
- +60°C
- Motor voltage
- 230 V
- Height (cm)
- 17.9
- Width (cm)
- 28.5
- Depth (cm)
- Weight kg)
- 9.9
- Guarantee
- 2
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PKm 80 - 1 HP single-phase peripheral impeller electric pumpThis product Flow rate up to 50 l/min (3 m³/h). Head up to 66 m. 0.75 Kw (1 HP) motor. |  PKm 90 - 1 HP single-phase peripheral impeller electric pumpFlow rate up to 40 l/min (2.4 m³/h). Head up to 82 m. 0.75 Kw (1 HP) motor. |  PKm 100 - 1.5 HP single-phase peripheral impeller electric pumpFlow rate up to 70 l/min (4.2 m³/h). Head up to 80 m. 1.1 Kw (1.5 HP) motor. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (Kw) | Motor power (Kw) 0.75 | Motor power (Kw) 0.75 | Motor power (Kw) 1.1 |
| Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 1 | Motor power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.2 | Absorption at 230V (A) 5.6 | Absorption at 230V (A) 9 |
| Capacitor | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL | Capacitor 31.5 µF450 VL |
| Suction mouth | Suction mouth 1 " | Suction mouth 3/4 " | Suction mouth 1 " |
| Delivery port | Delivery port 1 " | Delivery port 3/4 " | Delivery port 1 " |
| Body Pump | Body Pump Cast iron | Body Pump -- | Body Pump -- |
| Impeller | Impeller Brass | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 50 | Max flow (l./min.) 40 | Max flow (l./min.) 70 |
| Min head (m.) | Min head (m.) 22 | Min head (m.) 5 | Min head (m.) 15 |
| Max head (m.) | Max head (m.) 66 | Max head (m.) 90 | Max head (m.) 85 |
| Employments | Employments water supply | Employments water supply | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) +60°C |
| Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
| Height (cm) | Height (cm) 17.9 | Height (cm) 17.9 | Height (cm) 21.2 |
| Width (cm) | Width (cm) 28.5 | Width (cm) 27.8 | Width (cm) 35.6 |
| Depth (cm) | Depth (cm) -- | Depth (cm) 11.2 | Depth (cm) 15.2 |
| Weight kg) | Weight kg) 9.9 | Weight kg) 10.3 | Weight kg) 14.4 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Pompa arrivata dopo solo due giorni dall' ordine; rapporto ottimale prezzo/prestazioni; descrizione esauriente e conforme al prodotto, di cui si apprezza la qualità elevata. Grazie.
