chevron_left chevron_right
PKS 60 - Self-priming electric pump with 0.65 HP three-phase peripheral impeller
Flow rate up to 40 l/min (2.4 m³/h). Head up to 40 m. 0.37 Kw (0.50 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
It is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to its compactness, reliability and low cost, it is suitable for domestic use, for the distribution of water in combination with small pressure tanks, for irrigation of vegetable gardens and gardens, taking water from tanks and in any case in all those cases in which there is the presence of air or gas in the liquid to be pumped.
The pump is supplied with a check valve on the suction side.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Absorption at 400V (A)
- 1.15
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 40
- Min head (m.)
- 5
- Max head (m.)
- 40
- Employments
- water supply
- Liquid temperature max. (° C)
- +60°C
- Motor voltage
- 230 V, 400 V
- Height (cm)
- 18.3
- Width (cm)
- 19.6
- Depth (cm)
- 14.8
- Weight kg)
- 6.1
- Guarantee
- 2
PKS models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PKS 60-65
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | DX53D EN 10346 galvanized steel |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PKS 60 - Self-priming electric pump with 0.65 HP three-phase peripheral impellerThis product Flow rate up to 40 l/min (2.4 m³/h). Head up to 40 m. 0.37 Kw (0.50 HP) motor. |  PKS 65 - Self-priming electric pump with 0.75 HP three-phase peripheral impellerFlow rate up to 50 l/min (3 m³/h). Head up to 55 m. 0.55 Kw (0.75 HP) motor. |  PKS 80 - Self-priming electric pump with 1 HP three-phase peripheral impellerFlow rate up to 50 l/min (3 m³/h). Head up to 70 m. 0.75 Kw (1 HP) motor. | |
|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (HP) | Motor power (HP) 0.50 | Motor power (HP) 0.75 | Motor power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 2 | Absorption at 230V (A) 3 | Absorption at 230V (A) 3.8 |
| Absorption at 400V (A) | Absorption at 400V (A) 1.15 | Absorption at 400V (A) 1.7 | Absorption at 400V (A) 2.2 |
| Suction mouth | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller Brass | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 40 | Max flow (l./min.) 50 | Max flow (l./min.) 50 |
| Min head (m.) | Min head (m.) 5 | Min head (m.) 8 | Min head (m.) 22 |
| Max head (m.) | Max head (m.) 40 | Max head (m.) 55 | Max head (m.) 70 |
| Employments | Employments water supply | Employments water supply | Employments water supply |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) +60°C |
| Motor voltage | Motor voltage 230 V, 400 V | Motor voltage 230 V, 400 V | Motor voltage 230 V, 400 V |
| Height (cm) | Height (cm) 18.3 | Height (cm) 19 | Height (cm) 19.8 |
| Width (cm) | Width (cm) 19.6 | Width (cm) 22.7 | Width (cm) 26.3 |
| Depth (cm) | Depth (cm) 14.8 | Depth (cm) 14.8 | Depth (cm) 16 |
| Weight kg) | Weight kg) 6.1 | Weight kg) 6.9 | Weight kg) 10.5 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |