chevron_left chevron_right
PKSm 80 - Self-priming electric pump with 1 HP single-phase peripheral impeller
Flow rate up to 50 l/min (3 m³/h). Head up to 70 m. 0.75 Kw (1 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
It is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to its compactness, reliability and low cost, it is suitable for domestic use, for the distribution of water in combination with small pressure tanks, for irrigation of vegetable gardens and gardens, taking water from tanks and in any case in all those cases in which there is the presence of air or gas in the liquid to be pumped.
The pump is supplied with a check valve on the suction side.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 5.2
- Capacitor
- 20 µF450 VL
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 50
- Min head (m.)
- 22
- Max head (m.)
- 70
- Employments
- water supply
- Liquid temperature max. (° C)
- 60
- Motor voltage
- 230 V
- Height (cm)
- 19.8
- Width (cm)
- 26.3
- Depth (cm)
- 16
- Weight kg)
- 10.5
- Guarantee
- 2
PKSm models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PKS 70-80
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PKSm 80 - Self-priming electric pump with 1 HP single-phase peripheral impellerThis product Flow rate up to 50 l/min (3 m³/h). Head up to 70 m. 0.75 Kw (1 HP) motor. |  PKSm 60 - Self-priming electric pump with peripheral impeller, single-phase, 0.65 HPFlow rate up to 40 l/min (2.4 m³/h). Head up to 40 m. 0.37 Kw (0.50 HP) motor. |  PKSm 65 - Self-priming electric pump with peripheral impeller, single-phase, 0.75 HPFlow rate up to 50 l/min (3 m³/h). Head up to 55 m. 0.55 Kw (0.75 HP) motor. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.50 | Motor power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.2 | Absorption at 230V (A) 2.6 | Absorption at 230V (A) 3.7 |
| Capacitor | Capacitor 20 µF450 VL | Capacitor 10 µF450 VL | Capacitor 14 µF450 VL |
| Suction mouth | Suction mouth 1 " | Suction mouth 1 " | Suction mouth 1 " |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller Brass | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 50 | Max flow (l./min.) 40 | Max flow (l./min.) 50 |
| Min head (m.) | Min head (m.) 22 | Min head (m.) 5 | Min head (m.) 8 |
| Max head (m.) | Max head (m.) 70 | Max head (m.) 40 | Max head (m.) 55 |
| Employments | Employments water supply | Employments water supply | Employments water supply |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 60 | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) +60°C |
| Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
| Height (cm) | Height (cm) 19.8 | Height (cm) 18.3 | Height (cm) 19 |
| Width (cm) | Width (cm) 26.3 | Width (cm) 19.6 | Width (cm) 22.7 |
| Depth (cm) | Depth (cm) 16 | Depth (cm) 14.8 | Depth (cm) 14.8 |
| Weight kg) | Weight kg) 10.5 | Weight kg) 6.1 | Weight kg) 7.6 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
