PQm 81-Bs - Single-phase peripheral impeller electric pump 0.60 HP
Flow rate up to 20 l/min (1.2 m³/h). Head up to 95 m. 0.45 Kw (0.60 HP) motor.
The Pedrollo PQm 81-Bs electric pump is an update of the PQ series and is recommended for industrial use.
A unique feature of this pump is the construction of the pump body which in this case is made of brass.
This pump differs from the PQ series, in that the PQ series is for domestic use and the pump body of that series is made of steel.
The use of CW617N brass guarantees against the formation of rust and oxidation, which consequently allows the pump to last over time.
Thanks to its hydraulic characteristics, small size and compactness, the PQm 81-Bs allows for industrial use in very restricted areas in chillers, air conditioning, cooling or boiler power equipment.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The flow rate ranges from 1 to 20 liters per minute. The head ranges from 10 to 95 meters.
The PQm 81-Bs must be powered by a single-phase voltage, has a horsepower of 0.60 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
- Motor connection
- SINGLE PHASE
- Motor power (Kw)
- 0.44
- Motor power (HP)
- 0.60
- Absorption at 230V (A)
- 3.7
- Capacitor
- 12.5 µF450 VL
- Suction mouth
- 1/2 "
- Delivery port
- 1/2 "
- Body Pump
- brass, equipped with ISO 228/1 threaded union
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 1
- Max flow (l./min.)
- 15
- Min head (m.)
- 5
- Max head (m.)
- 80
- Employments
- water supply
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 15.5
- Width (cm)
- 22.4
- Depth (cm)
- 11.9
- Weight kg)
- 6.9
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6201 ZZ |
Opposite side motor bearing | 6201 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | ST1-12 |
LP diameter | 12 |
Fixed ring LP | Silicon carbide |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Brass CW617N EN 12165 |
2.1 - Seal holder cover | Brass CW617N EN 12165 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | DX53D EN 10346 galvanized steel |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
PQm 81-Bs - Single-phase peripheral impeller electric pump 0.60 HPThis product Flow rate up to 20 l/min (1.2 m³/h). Head up to 95 m. 0.45 Kw (0.60 HP) motor. | PQm 81-PPS - 0.75 HP single-phase peripheral impeller electric pumpFlow rate up to 90 l/min (1.32 m³/h). Head up to 22 m. 0.55 Kw (0.75 HP) motor. | |
---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (Kw) | Motor power (Kw) 0.44 | Motor power (Kw) 0.55 |
Motor power (HP) | Motor power (HP) 0.60 | Motor power (HP) 0.75 |
Absorption at 230V (A) | Absorption at 230V (A) 3.7 | Absorption at 230V (A) -- |
Capacitor | Capacitor 12.5 µF450 VL | Capacitor 12.5 µF450 VL |
Suction mouth | Suction mouth 1/2 " | Suction mouth 1/2 " |
Delivery port | Delivery port 1/2 " | Delivery port 1/2 " |
Body Pump | Body Pump brass, equipped with ISO 228/1 threaded union | Body Pump PPS |
Impeller | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve -- |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 1 | Flow rate min. (l./min.) -- |
Max flow (l./min.) | Max flow (l./min.) 15 | Max flow (l./min.) -- |
Min head (m.) | Min head (m.) 5 | Min head (m.) -- |
Max head (m.) | Max head (m.) 80 | Max head (m.) -- |
Employments | Employments water supply | Employments water supply |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) -- |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 15.5 | Height (cm) -- |
Width (cm) | Width (cm) 22.4 | Width (cm) -- |
Depth (cm) | Depth (cm) 11.9 | Depth (cm) -- |
Weight kg) | Weight kg) 6.9 | Weight kg) -- |
Guarantee | Guarantee 2 | Guarantee 2 |