PQ 81-Bs - 0.60 HP three-phase peripheral impeller electric pump
Flow rate up to 15 l/min (1.2 m³/h). Head up to 80 m. 0.45 Kw (0.60 HP) motor.
The Pedrollo PQ 81-Bs electric pump is an update of the PQ series and is recommended for industrial use.
A unique feature of this pump is the construction of the pump body which in this case is made of brass.
This pump differs from the PQ series, in that the PQ series is for domestic use and the pump body of that series is made of steel.
The use of CW617N brass guarantees against the formation of rust and oxidation, which consequently allows the pump to last over time.
Thanks to its hydraulic characteristics, small size and compactness, the PQ 81-Bs allows for industrial use in very restricted areas in chillers, air conditioning, cooling or boiler power equipment.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The flow rate ranges from 1 to 20 liters per minute. The head ranges from 10 to 95 meters.
The PQ 81-Bs must be powered by a three-phase voltage, has a horsepower of 0.60 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
- Motor connection
- THREE-PHASE
- Motor power (Kw)
- 0.44
- Motor power (HP)
- 0.60
- Absorption at 230V (A)
- 2.2
- Absorption at 400V (A)
- 1.3
- Suction mouth
- 1/2 "
- Delivery port
- 1/2 "
- Body Pump
- brass, equipped with ISO 228/1 threaded union
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 1
- Max flow (l./min.)
- 15
- Min head (m.)
- 5
- Max head (m.)
- 80
- Employments
- water supply
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 230 V, 400 V
- Height (cm)
- 15.5
- Width (cm)
- 22.4
- Depth (cm)
- 11.9
- Weight kg)
- 6.9
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | ST1-12 |
| LP diameter | 12 |
| Fixed ring LP | Silicon carbide |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Brass CW617N EN 12165 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | DX53D EN 10346 galvanized steel |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PQ 81-Bs - 0.60 HP three-phase peripheral impeller electric pumpThis product Flow rate up to 15 l/min (1.2 m³/h). Head up to 80 m. 0.45 Kw (0.60 HP) motor. | |
|---|---|
| Motor connection | Motor connection THREE-PHASE |
| Motor power (Kw) | Motor power (Kw) 0.44 |
| Motor power (HP) | Motor power (HP) 0.60 |
| Absorption at 230V (A) | Absorption at 230V (A) 2.2 |
| Absorption at 400V (A) | Absorption at 400V (A) 1.3 |
| Suction mouth | Suction mouth 1/2 " |
| Delivery port | Delivery port 1/2 " |
| Body Pump | Body Pump brass, equipped with ISO 228/1 threaded union |
| Impeller | Impeller Brass |
| Number of impellers | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no |
| Degree of protection | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 1 |
| Max flow (l./min.) | Max flow (l./min.) 15 |
| Min head (m.) | Min head (m.) 5 |
| Max head (m.) | Max head (m.) 80 |
| Employments | Employments water supply |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C |
| Motor voltage | Motor voltage 230 V, 400 V |
| Height (cm) | Height (cm) 15.5 |
| Width (cm) | Width (cm) 22.4 |
| Depth (cm) | Depth (cm) 11.9 |
| Weight kg) | Weight kg) 6.9 |
| Guarantee | Guarantee 2 |
