PQ 200 - 2 HP three-phase peripheral impeller electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 90 m. 1.5 Kw (2 HP) motor.




The Pedrollo PQ 200 peripheral electric pump with radial suction is suitable for domestic applications, for irrigating vegetable gardens, gardens, greenhouses, lawns and other similar applications.
The operation of the peripheral pump is very simple and reliable, as the movement of the impellers in the pumping body increases the pressure of the pumped water.
The PQ 200 is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The hydraulic characteristics of this pump, combined with its compactness, suggest its use in the domestic sector. Characterized by its noise, in the new version the pump is 20% quieter.
The flow rate ranges from 5 to 80 liters per minute. The head ranges from 10 to 90 meters.
The PQ 200 must be powered by a three-phase voltage, has a horsepower of 2 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
This pump has a 1 inch suction and delivery port.
Made of cast iron, steel and brass, the pump is well built, robust and very durable over time.
The installation must be carried out in well-ventilated closed places or in any case protected from the elements as its certified protection is IPX5.
- Motor connection
- THREE-PHASE
- Power (HP)
- 2
- Absorption at 230V (A)
- 8.3
- Absorption at 400V (A)
- 4.8
- Suction mouth
- 1 "
- Delivery mouth
- 1 "
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Min. flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 10
- Max. head (m.)
- 90
- Jobs
- water supply
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 21.1
- Width (cm)
- 32.25
- Depth (cm)
- 16.4
- Weight (Kg)
- 15.2
- Warranty (years)
- 2
|
|
|
|
|

Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side motor bearing | 6204 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-14 |
LP diameter | 14 |
Fixed ring LP | Graphite |
Rotating ring LP | Ceramic |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Brass CW617N EN 12165 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
![]() PQ 200 - 2 HP three-phase peripheral impeller electric pumpThis product Flow rate up to 80 l/min (4.8 m³/h). Head up to 90 m. 1.5 Kw (2 HP) motor. | ![]() PQ 90 - 1 HP three-phase peripheral impeller electric pumpFlow rate up to 40 l/min (2.4 m³/h). Head up to 90 m. 0.75 Kw (1 HP) motor. | ![]() PQ 100 - 1.5 HP three-phase peripheral impeller electric pumpFlow rate up to 70 l/min (4.2 m³/h). Head up to 85 m. 1.1 Kw (1.5 HP) motor. | ![]() PQ 300 - 3 HP three-phase peripheral impeller electric pumpFlow rate up to 90 l/min (5.4 m³/h). Head up to 100 m. 2.2 Kw (3 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Power (Kw) | Power (Kw) -- | Power (Kw) -- | Power (Kw) 1.1 | Power (Kw) -- |
Power (HP) | Power (HP) 2 | Power (HP) 1 | Power (HP) 1.5 | Power (HP) 3 |
Absorption at 230V (A) | Absorption at 230V (A) 8.3 | Absorption at 230V (A) 4.2 | Absorption at 230V (A) 6.2 | Absorption at 230V (A) 9 |
Absorption at 400V (A) | Absorption at 400V (A) 4.8 | Absorption at 400V (A) 2.4 | Absorption at 400V (A) 3.6 | Absorption at 400V (A) 5.2 |
Suction mouth | Suction mouth 1 " | Suction mouth 3/4 " | Suction mouth 1 " | Suction mouth 1 " |
Delivery mouth | Delivery mouth 1 " | Delivery mouth 3/4 " | Delivery mouth 1 " | Delivery mouth 1 " |
Pump body | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron |
Impeller | Impeller Brass | Impeller Brass | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel |
Check valve | Check valve No | Check valve No | Check valve No | Check valve No |
Degree of protection | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 5 | Min. flow rate (l./min.) 5 | Min. flow rate (l./min.) 5 | Min. flow rate (l./min.) 5 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 80 | Max. flow rate (l./min.) 40 | Max. flow rate (l./min.) 70 | Max. flow rate (l./min.) 90 |
Min. head (m.) | Min. head (m.) 10 | Min. head (m.) 5 | Min. head (m.) 15 | Min. head (m.) 10 |
Max. head (m.) | Max. head (m.) 90 | Max. head (m.) 90 | Max. head (m.) 85 | Max. head (m.) 100 |
Jobs | Jobs water supply | Jobs water supply | Jobs water supply | Jobs water supply |
Max. liquid temperature (°C) | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) +90°C |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 21.1 | Height (cm) 18.1 | Height (cm) 21.1 | Height (cm) 21.1 |
Width (cm) | Width (cm) 32.25 | Width (cm) 25.6 | Width (cm) 32.25 | Width (cm) 34.25 |
Depth (cm) | Depth (cm) 16.4 | Depth (cm) 14.2 | Depth (cm) 16.4 | Depth (cm) 16.4 |
Weight (Kg) | Weight (Kg) 15.2 | Weight (Kg) 8.9 | Weight (Kg) 14 | Weight (Kg) 17.8 |
Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |