PQm 65 - Single-phase peripheral impeller electric pump 0.70 HP
Flow rate up to 50 l/min (3 m³/h). Head up to 55 m. 0.55 Kw (0.70 HP) motor.
Buy it now and receive it between 26-11-2024 and 27-11-2024 with SDA - 2 giorni Italia
The Pedrollo PQm 65 peripheral electric pump with radial suction is suitable for domestic applications.
The pump has a very simple operation, the impellers are activated and thanks to their movement they pump the water into the pump body.
The PQm 65 is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
With the new version, the noise of the pump is more bearable and less intrusive thanks to the fact that it has been made quieter.
The flow rate ranges from 5 to 50 liters per minute. The head ranges from 8 to 55 meters.
The PQm 65 must be powered by a single-phase voltage, has a horsepower of 0.7 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
The suction and delivery mouth is 1 inch.
Made of cast iron, steel and brass, the pump guarantees excellent performance and durability over time.
The installation must be carried out in well-ventilated closed places or in any case protected from the elements as its certified protection is IPX5.
- Motor connection
- SINGLE PHASE
- Motor power (Kw)
- 0.55
- Motor power (HP)
- 0.75
- Absorption at 230V (A)
- 3.7
- Capacitor
- 14 µF450 VL
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 50
- Min head (m.)
- 8
- Max head (m.)
- 55
- Employments
- water supply
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 15.2
- Width (cm)
- 22
- Depth (cm)
- 10
- Weight kg)
- 7
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6201 ZZ |
Opposite side motor bearing | 6201 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | AR-12 |
LP diameter | 12 |
Fixed ring LP | Ceramic |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Brass CW617N EN 12165 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | DX53D EN 10346 galvanized steel |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
PQm 65 - Single-phase peripheral impeller electric pump 0.70 HPThis product Flow rate up to 50 l/min (3 m³/h). Head up to 55 m. 0.55 Kw (0.70 HP) motor. | PQm 61 - Single-phase peripheral impeller electric pump 0.50 HPFlow rate up to 33 l/min (1.98 m³/h). Head up to 40.5 m. 0.37 Kw (0.50 HP) motor. | PQm 80 - 1 HP single-phase peripheral impeller electric pumpFlow rate up to 50 l/min (3 m³/h). Head up to 70 m. 0.75 Kw (1 HP) motor. | |
---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (Kw) | Motor power (Kw) 0.55 | Motor power (Kw) 0.37 | Motor power (Kw) 0.75 |
Motor power (HP) | Motor power (HP) 0.75 | Motor power (HP) 0.50 | Motor power (HP) 1 |
Absorption at 230V (A) | Absorption at 230V (A) 3.7 | Absorption at 230V (A) 2 | Absorption at 230V (A) 5.2 |
Capacitor | Capacitor 14 µF450 VL | Capacitor 10 µF450 VL | Capacitor 20 µF450 VL |
Absorption at 400V (A) | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) -- |
Suction mouth | Suction mouth 1 " | Suction mouth 1/2 " | Suction mouth 1 " |
Delivery port | Delivery port 1 " | Delivery port 1/2 " | Delivery port 1 " |
Body Pump | Body Pump Cast iron | Body Pump Cast iron, AISI 304 stainless steel | Body Pump Cast iron |
Impeller | Impeller Brass | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 55 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 2 | Flow rate min. (l./min.) 5 |
Max flow (l./min.) | Max flow (l./min.) 50 | Max flow (l./min.) 33 | Max flow (l./min.) 50 |
Min head (m.) | Min head (m.) 8 | Min head (m.) 5 | Min head (m.) 22 |
Max head (m.) | Max head (m.) 55 | Max head (m.) 40.5 | Max head (m.) 70 |
Employments | Employments water supply | Employments water supply | Employments water supply |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) +90°C |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V, 400 V | Motor voltage 230 |
Height (cm) | Height (cm) 15.2 | Height (cm) 14.5 | Height (cm) 18.1 |
Width (cm) | Width (cm) 22 | Width (cm) 19.2 | Width (cm) 25.6 |
Depth (cm) | Depth (cm) 10 | Depth (cm) 10 | Depth (cm) 14.2 |
Weight kg) | Weight kg) 7 | Weight kg) 4.8 | Weight kg) 9.7 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |