PQ 90 - Three-phase peripheral impeller electric pump Pedrollo - 1
zoom_out_map
chevron_left chevron_right

PQ 90 - 1 HP three-phase peripheral impeller electric pump

Flow rate up to 40 l/min (2.4 m³/h). Head up to 90 m. 0.75 Kw (1 HP) motor.

€331.84

€272.00 Tax excluded

Variants:
PQ 60 - Elettropompa con girante periferica trifase da 0.50 HP
PQ 61 - Elettropompa con girante periferica trifase da 0.50 HP
PQ 65 - Elettropompa con girante periferica trifase da 0.70 HP
PQ 80 - Elettropompa con girante periferica trifase da 1 HP
PQ 90 - Elettropompa con girante periferica trifase da 1 HP
PQ 100 - Elettropompa con girante periferica trifase da 1.5 HP
PQ 200 - Elettropompa con girante periferica trifase da 2 HP
PQ 300 - Elettropompa con girante periferica trifase da 3 HP
There are no reviews yet
Close
Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PQ 90 - 1 HP three-phase peripheral impeller electric pump
  • Use dot instead of comma

Loading

Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description

The Pedrollo PQ 90 peripheral electric pump with radial suction is suitable for domestic applications or small irrigation systems.

It is also suitable for gardening and therefore for irrigation of vegetable gardens, gardens, greenhouses, lawns and other similar applications.

The operation of the peripheral pump is very simple, the impellers, thanks to their operation and movement, cause the water level to rise inside the pump body.

The PQ 90 is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.

With the new version, the pump is less noisy and invasive, because it is quieter and consequently also less problematic to keep at home.

The flow rate ranges from 5 to 50 liters per minute. The head ranges from 22 to 70 meters.

The PQ 90 must be powered by a single-phase voltage, has a horsepower of 1 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.

This pump is the only one of the series that has a 3/4 inch suction and discharge port. It is also the only one that has a mechanical seal in silicon carbide instead of ceramic.

Made of cast iron, steel and brass, the pump has a robust and solid construction.

The installation must be carried out in well-ventilated closed places or in any case protected from the elements as its certified protection is IPX5.

Data sheet
Pedrollo
PQ 90
19 Items
Motor connection
THREE-PHASE
Motor power (HP)
1
Absorption at 230V (A)
4.2
Absorption at 400V (A)
2.4
Suction mouth
3/4 "
Delivery port
3/4 "
Body Pump
Cast iron
Impeller
Brass
Number of impellers
1
Motor shaft
AISI 431 stainless steel
Check valve
no
Degree of protection
IP 55
Flow rate min. (l./min.)
5
Max flow (l./min.)
40
Min head (m.)
5
Max head (m.)
90
Employments
water supply
Liquid temperature max. (° C)
+90°C
Motor voltage
230 V
Height (cm)
18.1
Width (cm)
25.6
Depth (cm)
14.2
Weight kg)
9.9
Guarantee
2
Attachments

Technical sheet PQ

Models, performance curves and construction features of the PQ series Pedrollo pumps.

file_download Download (459.67KB)

Buy it with

  • PQ 90 - 1 HP three-phase peripheral impeller electric pump
  • +
  • BCm 15/50 - electric Pump CHANNEL for sewage water single-phase
  • +
  • PQm 90 - 1 HP single-phase peripheral impeller electric pump
  • €1,276.12-10 %
    Total price: €1,148.51
PQ models and performance
GUY
three-phase
PQ 60
PQ 61
PQ 65
PQ 80
PQ 90
PQ 100
PQ 200
PQ 300
POWER
KWHP
0.370.50
0.370.50
0.550.75
0.751
0.751
1.11.5
1.52
2.23
Construction data of the PQ 70-80-90
Pedrollo PQ pump section
Bearings
Pump side motor bearing 6203 ZZ
Opposite side motor bearing 6203 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model ST1-12
LP diameter 12
Fixed ring LP Silicon carbide
Rotating ring LP Graphite
LP elastomer NBR
Mat
1.0 - Pump Body Cast iron GJL 200 EN 1561
2.1 - Seal holder cover Brass CW617N EN 12165
3.0 - Impeller Brass CW617N EN 12165
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover Aluminum EN-AB 46100
7.0 - Lantern Aluminum EN-AB 46100

Compare with Similar Products

PQ 90 - Three-phase peripheral impeller electric pump Pedrollo - 1

PQ 90 - 1 HP three-phase peripheral impeller electric pump

This product

Flow rate up to 40 l/min (2.4 m³/h). Head up to 90 m. 0.75 Kw (1 HP) motor.

PQ 80 - Three-phase peripheral impeller electric pump Pedrollo - 1

PQ 80 - 1 HP three-phase peripheral impeller electric pump

Quick View

Flow rate up to 50 l/min (3 m³/h). Head up to 70 m. 0.75 Kw (1 HP) motor.

PQ 100 - Three-phase peripheral impeller electric pump Pedrollo - 1

PQ 100 - 1.5 HP three-phase peripheral impeller electric pump

Quick View

Flow rate up to 70 l/min (4.2 m³/h). Head up to 85 m. 1.1 Kw (1.5 HP) motor.

PQ 200 - Three-phase peripheral impeller electric pump Pedrollo - 1

PQ 200 - 2 HP three-phase peripheral impeller electric pump

Quick View

Flow rate up to 80 l/min (4.8 m³/h). Head up to 90 m. 1.5 Kw (2 HP) motor.

Motor connection Motor connection THREE-PHASE Motor connection THREE-PHASE Motor connection THREE-PHASE Motor connection THREE-PHASE
Motor power (Kw) Motor power (Kw) -- Motor power (Kw) 0.75 Motor power (Kw) 1.1 Motor power (Kw) --
Motor power (HP) Motor power (HP) 1 Motor power (HP) 1 Motor power (HP) 1.5 Motor power (HP) 2
Absorption at 230V (A) Absorption at 230V (A) 4.2 Absorption at 230V (A) 3.8 Absorption at 230V (A) 6.2 Absorption at 230V (A) 8.3
Absorption at 400V (A) Absorption at 400V (A) 2.4 Absorption at 400V (A) 2.2 Absorption at 400V (A) 3.6 Absorption at 400V (A) 4.8
Suction mouth Suction mouth 3/4 " Suction mouth 1 " Suction mouth 1 " Suction mouth 1 "
Delivery port Delivery port 3/4 " Delivery port 1 " Delivery port 1 " Delivery port 1 "
Body Pump Body Pump Cast iron Body Pump Cast iron Body Pump Cast iron Body Pump Cast iron
Impeller Impeller Brass Impeller Brass Impeller Brass Impeller Brass
Number of impellers Number of impellers 1 Number of impellers 1 Number of impellers 1 Number of impellers 1
Motor shaft Motor shaft AISI 431 stainless steel Motor shaft AISI 431 stainless steel Motor shaft AISI 431 stainless steel Motor shaft AISI 431 stainless steel
Check valve Check valve no Check valve no Check valve no Check valve no
Degree of protection Degree of protection IP 55 Degree of protection IP 55 Degree of protection IP 55 Degree of protection IP 55
Flow rate min. (l./min.) Flow rate min. (l./min.) 5 Flow rate min. (l./min.) 5 Flow rate min. (l./min.) 5 Flow rate min. (l./min.) 5
Max flow (l./min.) Max flow (l./min.) 40 Max flow (l./min.) 50 Max flow (l./min.) 70 Max flow (l./min.) 80
Min head (m.) Min head (m.) 5 Min head (m.) 22 Min head (m.) 15 Min head (m.) 10
Max head (m.) Max head (m.) 90 Max head (m.) 70 Max head (m.) 85 Max head (m.) 90
Employments Employments water supply Employments water supply Employments water supply Employments water supply
Liquid temperature max. (° C) Liquid temperature max. (° C) +90°C Liquid temperature max. (° C) +90°C Liquid temperature max. (° C) +90°C Liquid temperature max. (° C) +90°C
Motor voltage Motor voltage 230 V Motor voltage 230/400V-50Hz Motor voltage 230 V Motor voltage 230 V
Height (cm) Height (cm) 18.1 Height (cm) 18.1 Height (cm) 21.1 Height (cm) 21.1
Width (cm) Width (cm) 25.6 Width (cm) 25.6 Width (cm) 32.25 Width (cm) 32.25
Depth (cm) Depth (cm) 14.2 Depth (cm) 14.2 Depth (cm) 16.4 Depth (cm) 16.4
Weight kg) Weight kg) 9.9 Weight kg) 9.7 Weight kg) 14.1 Weight kg) 15.2
Guarantee Guarantee 2 Guarantee 5 Guarantee 2 Guarantee 2