Brio Top 2.0 - Electronic pressure regulator
For pumps up to 3 HP. With 1" male connection. With pressure gauge. With auto reset.
Italtecnica 's Brio Top 2.0 automatically controls the start and stop of single-phase electric pumps.
It totally replaces the traditional system consisting of a pressure switch and expansion tank or can be used as a digital pressure switch with two pressure thresholds.
It starts the electric pump following the decrease in pressure and stops it when the flow of liquid stops at the maximum pressure of the electric pump or when the set stop pressure is reached.
The Brio Top 2.0 protects against dry running in the event of a lack of water in the intake, allows automatic reset in the event of dry running stopping capable of autonomously resolving the error condition, the amperometric protection of the motor which intervenes in overload conditions or with blocked rotor.
The anti-ice protection starts the pump when the ambient temperature drops below 4° centigrade. The anti-blocking rotor function is useful to avoid stopping the mechanical parts during long periods of inactivity of the pump and the overpressure protection capable of stopping the electric pump at a set threshold value.
It can be installed in any vertical or horizontal position respecting the direction of flow.
- Restart pressure (bar)
- from 0.5 to 8 bar
- Line power supply
- single phase
- Supply voltage (Volt)
- 230
- Line current
- 16 A
- Motor power supply
- single phase
- Motor voltage
- 230 V
- Motor phase current
- 16 A
- Dry running protection
- Yes
- Attack size
- 1 "
- Type of attack
- male