Brio Top 2.0 - Electronic pressure regulator
With 1 1/4" M connection. With pressure gauge. With autoreset. For pumps up to 3 HP.
The Brio automatically controls the starting and stopping of single-phase electric pumps.
It totally replaces the traditional system made up of a pressure switch and expansion tank or can be used as a digital pressure switch with two pressure thresholds.
It starts the electric pump following a decrease in pressure and stops it when the flow of liquid is interrupted at the maximum pressure of the electric pump or when the set stop pressure is reached.
The device has various functions: it protects against dry running in the event of a lack of water in the suction, it allows automatic reset in the event of a stop due to dry running capable of independently solving the error condition, the amperometric protection of the motor that intervenes in overload conditions or with locked rotor, the anti-ice protection starts the pump when the ambient temperature drops below 4°C, the anti-lock rotor function is useful to prevent the mechanical parts from stopping during long periods inactivity of the pump and the over-pressure protection capable of stopping the electric pump at a set threshold value.
It can be installed in any vertical or horizontal position respecting the direction of the flow.
Also supplied with 3x1mmH07 R-NF cable with schuko plug and socket.
- Restart pressure (bar)
- from 0.5 to 8 bar
- Line power supply
- single phase
- Supply voltage (Volt)
- 230
- Line current
- 16 A
- Motor power supply
- single phase
- Motor voltage
- 230 V
- Motor phase current
- 16 A
- Dry running protection
- Yes
- Attack size
- 1 1/4 "
- Type of attack
- male