CK 50 - 0.50 HP three-phase self-priming liquid ring electric pump
Flow rate up to 40 l/min (2.4 m³/h). Head up to 35 m. Motor 0.37 Kw (0.50 HP).
They are recommended for pumping diesel/naphtha, clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
Thanks to their specific operating principle, they are an easy solution in all cases where a compact self-priming pump is required or the liquid flow is poor or irregular or mixed with air.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.37
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2.1
- Absorption at 400V (A)
- 1.2
- Suction mouth
- 3/4 "
- Delivery port
- 3/4 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 40
- Min head (m.)
- 5
- Max head (m.)
- 35
- Employments
- water supply, pressurization systems
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 15.2
- Width (cm)
- 12
- Depth (cm)
- 25.4
- Weight kg)
- 6.9
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6201 ZZ |
Opposite side engine bearing | 6201 ZZ |
Tree holding
Type of seal | Single Mechanical Seal |
Shrinkage DN1=450 DN2=350 | AR-12V |
LP diameter | 12 |
LP fixed ring | Ceramic |
LP rotating ring | Graphite |
LP elastomer | Viton |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Brass CW617N EN 12165 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | EN-AB 46100 aluminium |
6.1 - Engine cover | EN-AB 46100 aluminium |
7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
CK 50 - 0.50 HP three-phase self-priming liquid ring electric pumpThis product Flow rate up to 40 l/min (2.4 m³/h). Head up to 35 m. Motor 0.37 Kw (0.50 HP). | CK 50-BP - Three-phase self-priming liquid ring electric pumpFlow rate up to 40 l/min (2.4 m³/h). Head up to 20 m. Motor 0.25 Kw (0.33 HP). | |
---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Power (Kw) | Power (Kw) 0.37 | Power (Kw) 0.25 |
Power (HP) | Power (HP) 0.50 | Power (HP) 0.33 |
Absorption at 230V (A) | Absorption at 230V (A) 2.1 | Absorption at 230V (A) 2.1 |
Absorption at 400V (A) | Absorption at 400V (A) 1.2 | Absorption at 400V (A) 1.2 |
Suction mouth | Suction mouth 3/4 " | Suction mouth 3/4 " |
Delivery port | Delivery port 3/4 " | Delivery port 3/4 " |
Body Pump | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
Max flow (l./min.) | Max flow (l./min.) 40 | Max flow (l./min.) 40 |
Min head (m.) | Min head (m.) 5 | Min head (m.) 5 |
Max head (m.) | Max head (m.) 35 | Max head (m.) 35 |
Employments | Employments water supply, pressurization systems | Employments water supply, pressurization systems |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
Height (cm) | Height (cm) 15.2 | Height (cm) 15.2 |
Width (cm) | Width (cm) 12 | Width (cm) 12 |
Depth (cm) | Depth (cm) 25.4 | Depth (cm) 25.8 |
Weight kg) | Weight kg) 6.9 | Weight kg) 6.9 |
Guarantee | Guarantee 2 | Guarantee 2 |