JSWm 3CL - 1.5 HP Single Phase Self-Priming Electric Pump
Flow rate up to 160 l/min (9.6 m³/h). Head up to 40 m. 1.1 Kw (1.5 HP) motor.
It is recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The JSW self-priming pump is designed to suck water even in the presence of air mixed with the pumped liquid.
Due to its reliability and ease of use, it is recommended for domestic use, especially for water distribution in conjunction with small or medium-sized pressure tanks, for irrigation of vegetable gardens and gardens, etc.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1.5
- Absorption at 230V (A)
- 8.1
- Capacitor
- 35 µF450 VL
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 160
- Min head (m.)
- 15
- Max head (m.)
- 42
- Employments
- water supply, pressurization systems, irrigation, washing systems, transfer of tanks, fire prevention systems
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 24.1
- Width (cm)
- 20.6
- Depth (cm)
- 52.2
- Weight kg)
- 25.3
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side engine bearing | 6204 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 3.1 - Ejector group | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
 JSWm 3CL - 1.5 HP Single Phase Self-Priming Electric PumpThis product Flow rate up to 160 l/min (9.6 m³/h). Head up to 40 m. 1.1 Kw (1.5 HP) motor. |  JSWm 3CH - 1.5 HP Single Phase Self-Priming Electric PumpFlow rate up to 80 l/min (4.8 m³/h). Head up to 60 m. 1.1 Kw (1.5 HP) motor. |  JSWm 3CM - 1.5 HP Single Phase Self-Priming Electric PumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 50 m. 1.1 Kw (1.5 HP) motor. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 1.5 | Motor power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 8.1 | Absorption at 230V (A) 8.1 | Absorption at 230V (A) 8.1 |
| Capacitor | Capacitor 35 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor 31.5 µF450 VL |
| Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 |
| Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller Brass | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 |
| Max flow (l./min.) | Max flow (l./min.) 160 | Max flow (l./min.) 70 | Max flow (l./min.) 120 |
| Min head (m.) | Min head (m.) 15 | Min head (m.) 31 | Min head (m.) 20 |
| Max head (m.) | Max head (m.) 42 | Max head (m.) 64 | Max head (m.) 52 |
| Employments | Employments water supply, pressurization systems, irrigation, washing systems, transfer of tanks, fire prevention systems | Employments water supply, pressurization systems, irrigation, washing systems, transfer of tanks, fire prevention systems | Employments water supply, pressurization systems, irrigation, washing systems, transfer of tanks, fire prevention systems |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 24.1 | Height (cm) 24.1 | Height (cm) 24.1 |
| Width (cm) | Width (cm) 20.6 | Width (cm) 20.6 | Width (cm) 20.6 |
| Depth (cm) | Depth (cm) 52.2 | Depth (cm) 52.2 | Depth (cm) 52.2 |
| Weight kg) | Weight kg) 25.3 | Weight kg) 25.3 | Weight kg) 25.3 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Reviews (3) - Review moderation
Ottimo prodotto, quando è in funzione quasi non si sente rispetta la portata come da grafico, 50 metri di tubo da un pollice una altezza di 25 metri un gomito a 90° 100 litri circa al minuto. Ottima pompa.
Ricevuta 3 giorni dopo l'ordine, Installata, Provata, tutto ok impressione buona. Dovevo irrigare l'orto ma ieri è piovuto e la utilizzerò in seguito
Pas d alimentation électrique fournie et bouchon réservoir un peu fragile