JSWm 3AL - 3 HP Single Phase Self-Priming Electric Pump
Flow rate up to 160 l/min (4.8 m³/h). Head up to 64 m. Motor 2.2 Kw (3 HP).
The self-priming electric pump JSWm 3AL by Pedrollo is recommended for pumping clean water in domestic applications.
Designed to suck water even in the presence of air mixed with the pumped liquid.
Due to its reliability, the JSWm 3AL is especially recommended for water distribution in conjunction with small or medium pressure tanks, for irrigation of vegetable gardens and gardens, etc.
The flow rate ranges from 10 to 160 liters per minute. The head ranges from 36 to 64 meters.
The suction capacity of the JSWm 3AL is up to 9 metres.
It must be powered by a single-phase voltage, has a horsepower of 3 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +40.
The JSWm 3AL has a pump body made of cast iron, the impeller and the motor body in stainless steel. These materials give the pump good strength, resistance and allow it to last over time.
Installation must be carried out in well-ventilated closed places or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Motor power (Kw)
- 2.2
- Motor power (HP)
- 3
- Absorption at 230V (A)
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- Max flow (l./min.)
- Min head (m.)
- Max head (m.)
- Employments
- water supply, fire prevention systems, washing systems, pressurization systems, irrigation, transfer of tanks
- Liquid temperature max. (° C)
- Motor voltage
- 230 V
- Height (cm)
- Width (cm)
- Depth (cm)
- Weight kg)
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side engine bearing | 6204 ZZ |
Tree holding
Type of seal | Single Mechanical Seal |
Shrinkage DN1=450 DN2=350 | FN-18 |
LP diameter | 18 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
3.1 - Ejector group | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | EN-AB 46100 aluminium |
7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
JSWm 3AL - 3 HP Single Phase Self-Priming Electric PumpThis product Flow rate up to 160 l/min (4.8 m³/h). Head up to 64 m. Motor 2.2 Kw (3 HP). | JSWm 3AM - 3 HP Single Phase Self-Priming Electric PumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 78 m. 2.2 Kw (3 HP) motor. | JSWm 3CL - 1.5 HP Single Phase Self-Priming Electric PumpFlow rate up to 160 l/min (9.6 m³/h). Head up to 40 m. 1.1 Kw (1.5 HP) motor. | JSWm 3BL - 2 HP Single Phase Self-Priming Electric PumpFlow rate up to 160 l/min (9.6 m³/h). Head up to 48 m. 1.5 Kw (2 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (Kw) | Motor power (Kw) 2.2 | Motor power (Kw) 2.2 | Motor power (Kw) -- | Motor power (Kw) -- |
Motor power (HP) | Motor power (HP) 3 | Motor power (HP) 3 | Motor power (HP) 1.5 | Motor power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) 8.1 | Absorption at 230V (A) -- |
Capacitor | Capacitor -- | Capacitor -- | Capacitor 35 µF450 VL | Capacitor -- |
Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth -- |
Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port -- |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump -- |
Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller Brass | Impeller -- |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers -- |
Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- |
Check valve | Check valve no | Check valve no | Check valve no | Check valve -- |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection -- |
Flow rate min. (l./min.) | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) -- |
Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) 160 | Max flow (l./min.) 160 |
Min head (m.) | Min head (m.) -- | Min head (m.) -- | Min head (m.) 15 | Min head (m.) -- |
Max head (m.) | Max head (m.) -- | Max head (m.) -- | Max head (m.) 42 | Max head (m.) 48 |
Employments | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation, transfer of tanks | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation, transfer of tanks | Employments water supply, pressurization systems, irrigation, washing systems, transfer of tanks, fire prevention systems | Employments -- |
Liquid temperature max. (° C) | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) +40°C |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage -- | Motor voltage -- |
Height (cm) | Height (cm) -- | Height (cm) -- | Height (cm) 24.1 | Height (cm) -- |
Width (cm) | Width (cm) -- | Width (cm) -- | Width (cm) 20.6 | Width (cm) -- |
Length (cm) | Length (cm) -- | Length (cm) -- | Length (cm) -- | Length (cm) -- |
Depth (cm) | Depth (cm) -- | Depth (cm) -- | Depth (cm) 52.2 | Depth (cm) -- |
Weight kg) | Weight kg) -- | Weight kg) -- | Weight kg) 25.3 | Weight kg) 26.5 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee -- |