PLURIJETm 4/120 - 1 HP single-phase self-priming multi-impeller electric pump
Flow rate up to 130 l/min (4.8 m³/h). Head up to 50 m. 0.75 Kw (1 HP) motor.
The PLURIJETm 4/120 self-priming electric pump by Pedrollo is recommended for pumping clean water.
The flow rate ranges from 5 to 130 liters per minute. The head ranges from 5 to 50 meters.
It must be powered by a single-phase voltage, has a horsepower of 1 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to 60.
The PLURIJETm 4/120 is equipped with stainless steel impellers which are the best and most effective solution to satisfy domestic needs, thanks to their reliability, silence and low operating costs.
In the domestic environment it is an excellent solution thanks to the excellent suction capacity they are able to guarantee priming up to 9 meters deep.
Featuring multi-cell hydraulics that ensure maximum pressure with minimum power consumption, while reducing turbulence, an inevitable source of noise.
This makes operation extremely quiet.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 8.5
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 4
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 80
- Min head (m.)
- 33
- Max head (m.)
- 76
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 22.8
- Width (cm)
- 18.5
- Depth (cm)
- 54.9
- Weight kg)
- 19.4
- Guarantee
- 2