SKRm 1.5 - 2 HP single-phase self-priming electric pump
Flow rate up to 300 l/min (18 m³/h). Head up to 25.5 m. 1.5 Kw (2 HP) motor.
The Pedrollo SKRm 1.5 self-priming electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
It has a flow rate that varies from 50 to 300 litres per minute with a head of 15 to 25.5 metres.
It is designed to suck water even in the presence of air mixed with the pumped liquid. For their reliability and ease of use, they are recommended for domestic and civil use, especially for the distribution of water in combination with pressure tanks, for irrigation of vegetable gardens and gardens.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 2.8
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 60
- Min head (m.)
- 10
- Max head (m.)
- 35
- Employments
- water supply, pressurization systems, transfer of tanks
- Liquid temperature max. (° C)
- 40
- Motor voltage
- 230 V
- Height (cm)
- 18.2
- Width (cm)
- 18.2
- Depth (cm)
- 36.1
- Weight kg)
- 7.1
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side engine bearing | 6204 ZZ |
Tree holding
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
6.0 - Motor holder | EN-AB 46100 aluminium |
7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
SKRm 1.5 - 2 HP single-phase self-priming electric pumpThis product Flow rate up to 300 l/min (18 m³/h). Head up to 25.5 m. 1.5 Kw (2 HP) motor. | SKRm 1.1- 1.5 HP single-phase self-priming electric pumpFlow rate up to 250 l/min (18 m³/h). Head up to 24.5 m. 1.1 Kw (1.5 HP) motor. | |
---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Power (Kw) | Power (Kw) 1.5 | Power (Kw) 1.1 |
Power (HP) | Power (HP) 2 | Power (HP) 1.5 |
Absorption at 230V (A) | Absorption at 230V (A) 2.8 | Absorption at 230V (A) 2.8 |
Suction mouth | Suction mouth 1 "1/2 | Suction mouth 1 "1/2 |
Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
Body Pump | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Noryl | Impeller Noryl |
Number of impellers | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
Max flow (l./min.) | Max flow (l./min.) 60 | Max flow (l./min.) 60 |
Min head (m.) | Min head (m.) 10 | Min head (m.) 10 |
Max head (m.) | Max head (m.) 35 | Max head (m.) 35 |
Employments | Employments water supply, pressurization systems, transfer of tanks | Employments water supply, pressurization systems, transfer of tanks |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 18.2 | Height (cm) 18.2 |
Width (cm) | Width (cm) 18.2 | Width (cm) 18.2 |
Depth (cm) | Depth (cm) 36.1 | Depth (cm) 36.1 |
Weight kg) | Weight kg) 7.1 | Weight kg) 7.1 |
Guarantee | Guarantee 2 | Guarantee 2 |