BCm 15/50-MF - 1.5 HP single-phase DOUBLE-CHANNEL electric pump for waste water
Flow rate up to 750 l/min (45 m³/h). Head up to 14 m. 1.1 Kw (1.5 HP) motor.
The BC-MF submersible pumps are recommended for the drainage of dirty and sewage water in the domestic and civil sectors.
They are equipped with a DOUBLE-CHANNEL impeller which allows the pumping of liquids containing suspended solids up to Ø 50 mm in size with short fibres.
They are suitable for conveying waste water and sewage, waste water, surface water, water mixed with mud in uses such as: holiday homes, villas, single-family homes.
These pumps are distinguished by their reliability, especially in fixed installations with automatic operation.
- Motor connection
- SINGLE PHASE
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8.2
- Capacitor
- 25 µF450 VL
- Delivery port
- 2"
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 750
- Min head (m.)
- 2
- Max head (m.)
- 15
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 44.6
- Weight kg)
- 15.8
- Guarantee
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 2RS - C3 |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4404 (AISI 316L) |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 BCm 15/50-MF - 1.5 HP single-phase DOUBLE-CHANNEL electric pump for waste waterThis product Flow rate up to 750 l/min (45 m³/h). Head up to 14 m. 1.1 Kw (1.5 HP) motor. |  BCm 10/50-MF - 1 HP single-phase DOUBLE-CHANNEL electric pump for waste waterFlow rate up to 600 l/min (36 m³/h). Head up to 11 m. 0.75 Kw (1 HP) motor. | |
|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 8.2 | Absorption at 230V (A) 5 |
| Capacitor | Capacitor 25 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 2" | Delivery port 2" |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 750 | Max flow (l./min.) 600 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 15 | Max head (m.) 12 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 44.6 | Height (cm) 43.1 |
| Weight kg) | Weight kg) 15.8 | Weight kg) 14.9 |
| Guarantee | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Bonjour à toutes et tous. Mon avis sur cette pompe de relevage. Comme d'habitude chez Pedrollo, pas de problème pour l'installation très simple. Matériel robuste professionnel comme attendu. Fonctionne bien pour faire du relevage d'eaux de pluie dans puisard collecteur. Flotteur pratique a régler. Je conseille ce produit aux professionnels ainsi qu'aux particuliers qui bricolent. Bien Cordialement