chevron_left chevron_right
-42%
BC 15/50 - 1.5 HP three-phase DOUBLE-CHANNEL electric pump for waste water
Flow rate up to 750 l/min (45 m³/h). Head up to 15 m. 1.1 Kw (1.5 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description
The BC 15/50 submersible pump is recommended for draining dirty and sewage water in the domestic and civil sectors. It is equipped with a DOUBLE-CHANNEL stainless steel impeller that allows the pumping of liquids with the presence of suspended solids of up to Ø 50 mm, with short fibers.
It is suitable for conveying waste water and sewage, waste water, surface water, water mixed with mud in uses such as: holiday homes, villas and single-family homes.
This pump stands out for its reliability, especially in fixed installations with automatic operation.
Data sheet
- Motor connection
- THREE-PHASE
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 5.5
- Absorption at 400V (A)
- 3.2
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 750
- Min head (m.)
- 2
- Max head (m.)
- 15
- Cable length (m)
- 10
- Employments
- drainage, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 44.6
- Weight kg)
- 15.5
- Guarantee
- 2
BC models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the BC 15/50
Bearings
| Pump side motor bearing | 6203 2RS - C3 |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 BC 15/50 - 1.5 HP three-phase DOUBLE-CHANNEL electric pump for waste waterThis product Flow rate up to 750 l/min (45 m³/h). Head up to 15 m. 1.1 Kw (1.5 HP) motor. |  BC 10/50 (5m) - 1 HP three-phase DOUBLE-CHANNEL electric pump for waste waterFlow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 Kw (1 HP) motor. 5 meters of cable. |  BC 10/50-N (10m) - 1 HP three-phase DOUBLE-CHANNEL electric pump for waste waterFlow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 Kw (1 HP) motor. 10 meters of cable. | |
|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.5 | Absorption at 230V (A) 3.7 | Absorption at 230V (A) 3.6 |
| Absorption at 400V (A) | Absorption at 400V (A) 3.2 | Absorption at 400V (A) 2.1 | Absorption at 400V (A) 2.1 |
| Delivery port | Delivery port 2" | Delivery port 2" | Delivery port 2" |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 750 | Max flow (l./min.) 600 | Max flow (l./min.) 600 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 15 | Max head (m.) 12 | Max head (m.) 12 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 5 | Cable length (m) 5 |
| Employments | Employments drainage, slightly dirty waters | Employments drainage, slightly dirty waters | Employments drainage, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 44.6 | Height (cm) 43.1 | Height (cm) 43.1 |
| Weight kg) | Weight kg) 15.5 | Weight kg) 13.8 | Weight kg) 13.8 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
