Dm 10 (10m) - electric Pump for clean water single-phase
Flow rate up to 300 l/min (18 m3/h). Head up to 16 m. Motor 0.75 Kw (1 HP). 10 m cable with shuko plug.
Designed for draining clear or slightly dirty, it is recommended for use in domestic, civil and professional for the drainage of flooded basements and garages, such as basements, garages, emptying swimming pools and tanks, disposal of waste water, not sewage.
This pump stands for reliability, in particular in fixed installations with automatic operation.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 4.7
- Capacitor
- 20 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 25
- Max flow (l./min.)
- 300
- Min head (m.)
- 3
- Max head (m.)
- 16
- Cable length (m)
- 10
- Employments
- drying up, drainage
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 34
- Weight kg)
- 13.1
- Guarantee
- Two years
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
Dm 10 (10m) - electric Pump for clean water single-phaseThis product Flow rate up to 300 l/min (18 m3/h). Head up to 16 m. Motor 0.75 Kw (1 HP). 10 m cable with shuko plug. | Dm 8 (10m) - electric Pump for clean water single-phaseFlow up to 250 l/min (15 m3/h). Head up to 13 m. Motor 0.55 Kw (0.75 HP). 10 m cable with shuko plug. | Dm 20 (10m) - Single-phase electric pump for clear waterFlow rate up to 250 l/min (15 m³/h). Head up to 20 m. 0.75 Kw (1 HP) motor. 10 meters of cable with Shuko plug. | Dm 30 - electric Pump for clean water single-phaseFlow rates up to 275 l/min (16.5 m3/h). Head up to 26 m. Motor 1.1 Kw (1.5 HP). | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.75 | Motor power (HP) 1 | Motor power (HP) 1.5 |
Absorption at 230V (A) | Absorption at 230V (A) 4.7 | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 5.7 | Absorption at 230V (A) 7.2 |
Capacitor | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL | Capacitor 25 µF450 VL |
Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Technopolymer | Impeller Technopolymer | Impeller Technopolymer | Impeller Technopolymer |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 |
Max flow (l./min.) | Max flow (l./min.) 300 | Max flow (l./min.) 250 | Max flow (l./min.) 250 | Max flow (l./min.) 275 |
Min head (m.) | Min head (m.) 3 | Min head (m.) 3 | Min head (m.) 8 | Min head (m.) 9 |
Max head (m.) | Max head (m.) 16 | Max head (m.) 13 | Max head (m.) 20 | Max head (m.) 26 |
Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
Employments | Employments drying up, drainage | Employments drying up, drainage | Employments drainage, drying up | Employments drying up, drainage |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 34 | Height (cm) 34 | Height (cm) 34 | Height (cm) 35.5 |
Weight kg) | Weight kg) 13.1 | Weight kg) 12 | Weight kg) 13.1 | Weight kg) 15.1 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |