MCm 10/45 - 1 HP SINGLE-PHASE DOUBLE-CHANNEL ELECTRIC PUMPS FOR SEWAGE
Flow rate up to 600 l/min (36 m³/h). Head up to 11 m. 0.75 Kw (1 HP) motor.
The MC series pumps are equipped with a DOUBLE-CHANNEL impeller which allows the drainage of liquids containing suspended solids up to Ø 50 mm in size with short fibres.
They are made of cast iron of considerable thickness, exceptional strength, resistance to abrasion and durability over time.
They are recommended for conveying waste water and sewage, waste water, water mixed with sludge, groundwater and surface water for uses such as: condominiums, industries, multi-storey car parks, underground car parks, washing areas, etc.
New version of the DC series completely designed and made even more reliable with the introduction of the double mechanical seal and the cataphoresis treatment of all cast iron parts.
- Motor connection
- SINGLE PHASE
- Power (HP)
- 1
- Absorption at 230V (A)
- 5.0
- Capacitor
- 20 µF450 VL
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 600
- Min head (m.)
- 2
- Max head (m.)
- 12
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 41.3
- Weight kg)
- 41.3
- Guarantee
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| Engine side model | MG1-14D SIC |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 MCm 10/45 - 1 HP SINGLE-PHASE DOUBLE-CHANNEL ELECTRIC PUMPS FOR SEWAGEThis product Flow rate up to 600 l/min (36 m³/h). Head up to 11 m. 0.75 Kw (1 HP) motor. |  MCm 15/45 - 1.5 HP SINGLE-PHASE DOUBLE-CHANNEL ELECTRIC PUMPS FOR SEWAGEFlow rate up to 750 l/min (45 m³/h). Head up to 14 m. 1.1 Kw (1.5 HP) motor. |  MCm 15/50 - 1.5 HP SINGLE-PHASE DOUBLE-CHANNEL ELECTRIC PUMPS FOR SEWAGEFlow rate up to 800 l/min (48 m³/h). Head up to 14 m. 1.1 Kw (1.5 HP) motor. |  MCm 20/50 - 2 HP single-phase DOUBLE-CHANNEL electric pumps for sewage waterFlow rate up to 900 l/min (54 m³/h). Head up to 16 m. 1.5 Kw (2 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 1 | Power (HP) 1.5 | Power (HP) 1.5 | Power (HP) 2 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.0 | Absorption at 230V (A) 8.2 | Absorption at 230V (A) 9.0 | Absorption at 230V (A) 10.5 |
| Capacitor | Capacitor 20 µF450 VL | Capacitor 25 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor 50 µF450 VL |
| Delivery port | Delivery port 2" | Delivery port 2" | Delivery port 2 "1/2 | Delivery port 2 "1/2 |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 |
| Max flow (l./min.) | Max flow (l./min.) 600 | Max flow (l./min.) 750 | Max flow (l./min.) 800 | Max flow (l./min.) 900 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 1 | Min head (m.) 1 |
| Max head (m.) | Max head (m.) 12 | Max head (m.) 15 | Max head (m.) 14 | Max head (m.) 18 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 41.3 | Height (cm) 42.8 | Height (cm) 52.4 | Height (cm) 52.4 |
| Weight kg) | Weight kg) 41.3 | Weight kg) 20.2 | Weight kg) 36.7 | Weight kg) 37.7 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Ottimo servizio, e massima disponibilità del servizio clienti, per non parlare dell'imballo eccezionale, lo consiglio a oggi ha i prezzi più bassi in rete sulle pompe sommergibili.