chevron_left chevron_right
-42%
MC 30/65 - 3 HP three-phase DOUBLE-CHANNEL electric pumps for sewage water
Flow rate up to 1500 l/min (90 m³/h). Head up to 12 m. 2.2 Kw (3 HP) motor.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
The MC series electric pumps, built in cast iron of considerable thickness, are exceptionally robust, resistant to abrasion and long-lasting.
They are equipped with a DOUBLE-CHANNEL impeller which allows the drainage of liquids containing suspended solids with short fibres.
They are therefore suitable for conveying waste water and sewage, waste water, water mixed with sludge, groundwater and surface water from uses such as: condominiums, public buildings, industries, multi-storey car parks, underground car parks, washing areas, etc.
Data sheet
- Motor connection
- THREE-PHASE
- Power (HP)
- 3
- Absorption at 400V (A)
- 5.9
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 1500
- Min head (m.)
- 2
- Max head (m.)
- 13
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 56.3
- Weight kg)
- 41.7
- Guarantee
- 2
Models and performances MC 50-65
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the MC 50 series
Bearings
| Pump side motor bearing | 6305 CM D 6 |
| Opposite side engine bearing | 6204 ZZ-C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-22 |
| LM diameter | 22 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-20 |
| LP diameter | 20 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 MC 30/65 - 3 HP three-phase DOUBLE-CHANNEL electric pumps for sewage waterThis product Flow rate up to 1500 l/min (90 m³/h). Head up to 12 m. 2.2 Kw (3 HP) motor. |  MC 30/50 - 3 HP three-phase DOUBLE-CHANNEL electric pumps for sewage waterFlow rate up to 1100 l/min (66 m³/h). Head up to 22 m. 2.2 Kw (3 HP) motor. |  MC 40/50 - 2 HP three-phase DOUBLE-CHANNEL electric pumps for sewage waterFlow rate up to 1100 l/min (66 m³/h). Head up to 24 m. 3 Kw (4 HP) motor. |  MC 40/65 - 4 HP three-phase DOUBLE-CHANNEL electric pumps for sewage waterFlow rate up to 1600 l/min (96 m³/h). Head up to 15 m. 3 Kw (4 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (HP) | Power (HP) 3 | Power (HP) 3 | Power (HP) 4 | Power (HP) 4 |
| Capacitor | Capacitor -- | Capacitor 60 µF450 VL | Capacitor -- | Capacitor -- |
| Absorption at 400V (A) | Absorption at 400V (A) 5.9 | Absorption at 400V (A) 5.7 | Absorption at 400V (A) 7.8 | Absorption at 400V (A) 7.8 |
| Delivery port | Delivery port 3 " | Delivery port 2 "1/2 | Delivery port 2 "1/2 | Delivery port 2 "1/2 |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 200 |
| Max flow (l./min.) | Max flow (l./min.) 1500 | Max flow (l./min.) 1100 | Max flow (l./min.) 1100 | Max flow (l./min.) 1600 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 4 | Min head (m.) 4 |
| Max head (m.) | Max head (m.) 13 | Max head (m.) 24 | Max head (m.) 25 | Max head (m.) 17 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 56.3 | Height (cm) 53.7 | Height (cm) 53.7 | Height (cm) 57.7 |
| Weight kg) | Weight kg) 41.7 | Weight kg) 41.9 | Weight kg) 42.2 | Weight kg) 45.3 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |