chevron_left chevron_right
RXm 1 - GM (5m) - Single-phase electric pump for clear water 0.33 HP
Flow rate up to 160 l/min (9.6 m³/h). Head up to 6.5 m. 0.25 Kw (0.33 HP) motor. 5 meters of cable with shuko plug.
WITH MAGNETIC FLOAT
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
RX pumps are suitable for drainage of clear water without abrasive particles.
The construction solutions employed guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
They are recommended for fixed installations, emergency draining of small flooded areas (rooms, basements, garages), disposal of domestic waste water from dishwashers and washing machines, emptying collection pits.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.33
- Absorption at 230V (A)
- 1.5
- Capacitor
- 10 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 160
- Min head (m.)
- 1
- Max head (m.)
- 7.5
- Cable length (m)
- 5
- Employments
- drainage, drying up
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 27
- Width (cm)
- 14.7
- Weight kg)
- 5.9
- Guarantee
- 2
RXm models and performances - GM
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the RX1
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 RXm 1 - GM (5m) - Single-phase electric pump for clear water 0.33 HPThis product Flow rate up to 160 l/min (9.6 m³/h). Head up to 6.5 m. 0.25 Kw (0.33 HP) motor. 5 meters of cable with shuko plug. WITH MAGNETIC FLOAT |  RXm 2 - GM (5m) - Single-phase clear water electric pump 0.50 HPFlow rate up to 220 l/min (13.2 m³/h). Head up to 9.5 m. 0.37 Kw (0.50 HP) motor. 5 meters of cable with shuko plug. WITH MAGNETIC FLOAT |  RXm 3 - GM (5m) - Single-phase clear water electric pump 0.75 HPFlow rate up to 220 l/min (13.2 m³/h). Head up to 12 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable with shuko plug. WITH MAGNETIC FLOAT |  RXm 4 - GM - 1 HP single-phase clear water electric pumpFlow rate up to 260 l/min (15.6 m³/h). Head up to 16 m. 0.75 Kw (1 HP) motor. WITH MAGNETIC FLOAT | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 0.33 | Motor power (HP) 0.50 | Motor power (HP) 0.75 | Motor power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 1.5 | Absorption at 230V (A) 2.0 | Absorption at 230V (A) 3.6 | Absorption at 230V (A) 5.4 |
| Capacitor | Capacitor 10 µF450 VL | Capacitor 10 µF450 VL | Capacitor 14 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/2 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 160 | Max flow (l./min.) 220 | Max flow (l./min.) 220 | Max flow (l./min.) 260 |
| Min head (m.) | Min head (m.) 1 | Min head (m.) 2 | Min head (m.) 3 | Min head (m.) 4 |
| Max head (m.) | Max head (m.) 7.5 | Max head (m.) 10 | Max head (m.) 12 | Max head (m.) 16 |
| Cable length (m) | Cable length (m) 5 | Cable length (m) 5 | Cable length (m) 5 | Cable length (m) 10 |
| Employments | Employments drainage, drying up | Employments drainage, drying up | Employments drainage, drying up | Employments drainage, drying up |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 27 | Height (cm) 27 | Height (cm) 30 | Height (cm) 36.7 |
| Width (cm) | Width (cm) 14.7 | Width (cm) 14.7 | Width (cm) 14.7 | Width (cm) 22 |
| Weight kg) | Weight kg) 5.9 | Weight kg) 5.9 | Weight kg) 7.3 | Weight kg) 14 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
